AUDI Q7 (4L) 3.0L V6 24V TDI 176kW/236HP EDC17CP04

ECU BOSCH EDC17CP04 · 239 CV (176 kW) · 3000 cc · Diesel sovralimentato

ECU 数据库AUDI › AUDI Q7 (4L) 3.0L V6 24V TDI 176kW/236HP EDC17CP04

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 12 固件版本

车辆数据

品牌AUDI
型号Q7 (4L)
发动机3.0L V6 24V TDI 176kW/236HP EDC17CP04
原厂功率239 CV / 176 kW
排量3000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号EDC17CP04
存储 / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

可用的调校选项:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Maximum torque limitation at clutch
  • EGR valve control
  • EGR valve control 2
  • EGR valve control 3
  • EGR valve control 4
  • EGR valve control 5
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection opening time related to inj. pressure
  • Initialization values over pressure control valve
  • J
  • Injection 2
  • Speed / RPM limiter
  • Lambda reference
  • Minimum LSU sensor temperature limit - heater control
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature limit - heater control
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Speed limiter
  • Maximum indicated torque
  • Maximum indicated torque for monitoring
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for fuel overheating
  • Protection for oil overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Relative permissible torque from the pedal position in torque limitation
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure in aftertreatment modes
  • Specific pressure injection after starting
  • Driver torque request
  • Driver torque request for reverse gear
  • CAT downstream temperature sensor characterization
  • DPF downstream temperature sensor characterization
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque model - torque to fuel quantity conversion - particulate regeneration mode
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2
  • Variable geometry duty cycle limit 3
  • Variable geometry duty cycle limit in regeneration mode

固件标识 (12)

硬件号软件号 (chip)版本升级软件ECU
1.00.0204L1910401D 0050 BOSCH EDC17CP04
1.00.0104L1910401D 0010 BOSCH EDC17CP04
1.00.0334L1910401N 0040 BOSCH EDC17CP04
1.00.0454L1910401D 0080 BOSCH EDC17CP04
1.94.0254L1910401D 0060 BOSCH EDC17CP04
1.00.0264L1910401D 0040 BOSCH EDC17CP04
1.00.0064L0910401G 0020 BOSCH EDC17CP04
1.00.0204L1910401N 0030 BOSCH EDC17CP04
1.00.0234L1910401N 0020 BOSCH EDC17CP04
1.00.0314L0910401G 0060 BOSCH EDC17CP04
1.00.0164L1910401F 0010 BOSCH EDC17CP04
1.00.0174L0910401G 0070 BOSCH EDC17CP04

ECU 说明

MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 It is possible to support this ECU via OBDII using NewGenius and protocol FLASH_0506 WITHOUT PERFORMING the unlock patch and starting always from a 16Mbit TOTAL size file. To work on this ECU you can use NewTrasdata