ECU 数据库 ›
AUDI › AUDI Q3 (8U) 2.0L 16V TDI 103kW/138HP EDC17C46
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 20 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | Q3 (8U) |
| 发动机 | 2.0L 16V TDI 103kW/138HP EDC17C46 |
| 原厂功率 | 140 CV / 103 kW |
| 排量 | 2000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17C46 |
| 存储 / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
可用的调校选项:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- EGR valve control 6
- EGR valve control 7
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection period 8
- Injection period 9
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- Injection 2
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max allowed torque for speed ratio
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
固件标识 (20)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.00.018 | 03L906018CM 9977 |
BOSCH EDC17C46 |
| — | — |
1.00.007 | 03L906018ES 9979 |
BOSCH EDC17C46 |
| — | — |
1.00.020 | 03L906018CN 1162 |
BOSCH EDC17C46 |
| — | — |
1.00.013 | 03L906018CN 9979 |
BOSCH EDC17C46 |
| — | — |
1.00.019 | 03L906018ES 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.018 | 03L906018CN 4960 |
BOSCH EDC17C46 |
| — | — |
1.00.021 | 03L906018CN 3012 |
BOSCH EDC17C46 |
| — | — |
1.00.011 | 03L906018CM 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.013 | 03L906018RN 5220 |
BOSCH EDC17C46 |
| — | — |
1.00.026 | 03L906018CN 9977 |
BOSCH EDC17C46 |
| — | — |
1.00.026 | 03L906018PJ 4459 |
BOSCH EDC17C46 |
| — | — |
1.00.022 | 03L906018CM 4900 |
BOSCH EDC17C46 |
| — | — |
1.00.013 | 03L906018CM 4307 |
BOSCH EDC17C46 |
| — | — |
1.00.015 | 03L906018CN 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.019 | 03L906018QH 5214 |
BOSCH EDC17C46 |
| — | — |
1.00.020 | 03L906018CN 4309 |
BOSCH EDC17C46 |
| — | — |
1.94.011 | 03L906018MP 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.017 | 03L906018CM 2434 |
BOSCH EDC17C46 |
| — | — |
1.94.019 | 03L906018QH 9979 |
BOSCH EDC17C46 |
| — | — |
1.00.005 | 03L906018PJ 9978 |
BOSCH EDC17C46 |
车辆技术说明
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU 说明
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
