ECU 数据库 ›
AUDI › AUDI ALLROAD A4/A6 2.7L V6 TDI 120kW/161HP EDC17 CP14
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
2 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | ALLROAD A4/A6 |
| 发动机 | 2.7L V6 TDI 120kW/161HP EDC17 CP14 |
| 原厂功率 | 163 CV / 12 kW |
| 排量 | 2700 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | EDC17CP14 |
| 存储 / EPROM | MICRO ST TRICORE 1796 + XROM SPANSION CD016 |
可用的调校选项:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- EGR valve control 6
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection period 10
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 7
- Injection period 8
- Injection period 9
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- J
- Lambda reference
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit in regeneration mode
固件标识 (2)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.00.019 | 4F7910401N 0090 |
BOSCH EDC17CP14 |
| — | — |
1.00.022 | 4F7910401G 0040 |
BOSCH EDC17CP14 |
车辆技术说明
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU 说明
EPROM SPANSION S29CD016 PQFP 80 Pin + MicroTRICORE TC1796 It is possible to support this ECU via OBDII using NewGenius and protocol FLASH_0506 WITHOUT PERFORMING the unlock patch and starting always from a 32Mbit TOTAL size file. To work on this ECU you can use NewTrasdata
