AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

ECU BOSCH ME7.1/5 · 250 CV (184 kW) · 2700 cc · Benzina sovralimentato

ECU 数据库AUDI › AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 10 固件版本

车辆数据

品牌AUDI
型号ALLROAD A4/A6
发动机2.7L BITURBO 184kW/247HP ME7.1
原厂功率250 CV / 184 kW
排量2700 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1/5
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Constant pressure control
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

固件标识 (10)

硬件号软件号 (chip)版本升级软件ECU
02612066401037354754 1.21.0054Z7907551B 0003 BOSCH ME7.1/5
02612066411037354775 1.21.0124Z7907551C 0005 BOSCH ME7.1/5
02612066411037354549 1.21.0074Z7907551C 0003 BOSCH ME7.1/5
02612071341037360277 1.21.0214Z7907551E 0001 BOSCH ME7.1/5
02612071341037354808 1.21.0044Z7907551E 0001 BOSCH ME7.1/5
02612071371037360858 1.21.0124Z7907551D 0002 BOSCH ME7.1/5
02612071381037360874 1.21.0104Z7907551H 0002 BOSCH ME7.1/5
02612071381037354847 1.21.0064Z7907551H 0001 BOSCH ME7.1/5
02612072601037360860 1.21.0054Z7907551K 0002 BOSCH ME7.1/5
02612072601037360166 1.21.0044Z7907551K 0001 BOSCH ME7.1/5

车辆技术说明

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU 说明

Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.