AUDI A8 (D2/4D) 4.2L V8 40V 265KW/360HP ME7

ECU BOSCH ME7.1.1 · 360 CV (265 kW) · 4200 cc · Benzina aspirato

ECU 数据库AUDI › AUDI A8 (D2/4D) 4.2L V8 40V 265KW/360HP ME7

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 18 固件版本

车辆数据

品牌AUDI
型号A8 (D2/4D)
发动机4.2L V8 40V 265KW/360HP ME7
原厂功率360 CV / 265 kW
排量4200 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Air mass flow

固件标识 (18)

硬件号软件号 (chip)版本升级软件ECU
02612011481037393280 1.42.0044E0910560S 0030 BOSCH ME7.1.1
02612068411037360180 1.21.0074D0907558T 0003 BOSCH ME7.1.1
02612068411037354730 1.21.0134D0907558T 0001 BOSCH ME7.1.1
02612072561037366921 1.42.0074E0910560 0060 BOSCH ME7.1.1
02612072571037369023 1.42.0164E0910560A 0070 BOSCH ME7.1.1
02612076291037362911 1.21.0044D0907558AC 0002 BOSCH ME7.1.1
02612078901037367201 1.42.0114E0910560B 0030 BOSCH ME7.1.1
02612078901037366864 1.42.0074E0910560B 0020 BOSCH ME7.1.1
02612081471037393273 1.42.0174E0910560E 0040 BOSCH ME7.1.1
02612081471037368095 1.42.0104E0910560E 0020 BOSCH ME7.1.1
02612081471037368095 1.42.0074E0910560E 0020 BOSCH ME7.1.1
02612081471037366479 1.42.0104E0910560E 0010 BOSCH ME7.1.1
02612084931037368674 1.42.0134E0910560K 0010 BOSCH ME7.1.1
02612084951037368676 1.42.0104E0910560M 0010 BOSCH ME7.1.1
02612084971037368683 1.42.0084E0910560J 0010 BOSCH ME7.1.1
02612089221037380950 1.42.0164E0910560P 0020 BOSCH ME7.1.1
02612060151037350096 1.21.0134D0907558H 0003 BOSCH ME7.1/5
02612063621037352192 1.21.0084D0907560G 0001 BOSCH ME7.1/5

车辆技术说明

OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.

ECU 说明

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.