ECU 数据库 ›
AUDI › AUDI A6 (C7/4G) 3.0L V6 24V TDI 160kW/215HP MD1CP004
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 8 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | A6 (C7/4G) |
| 发动机 | 3.0L V6 24V TDI 160kW/215HP MD1CP004 |
| 原厂功率 | 218 CV / 16 kW |
| 排量 | 3000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | MD1CP004 |
| 存储 / EPROM | Micro BGA FREESCALE - 8192 Kbit - 800000 |
可用的调校选项:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Boost pressure 5
- Boost pressure 6
- Boost pressure 7
- Protection for cylinder head overheating
- Max accepted exhaust gas temperature value before turbine
- Protection for engine overheating
- Basic torque management at engine cranking
- Injection period
- Injection period 10
- Injection period 12
- Injection period 13
- Injection period 14
- Injection period 15
- Injection period 16
- Injection period 17
- Injection period 18
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection period 8
- Injection period 9
- Injection period limit
- Injection period limit 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection 1
- Injection 2
- Injection 3
- J
- Injection 5
- Injection 6
- Injection 7
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 3
- Speed limiter
- Speed limiter 2
- Max torque profile - AT
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Driver torque request
- Driver torque request 2
- Driver torque request 3
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Start of injection
- Start of injection 2
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
固件标识 (8)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.02.018 | 4G2907311G 0002 |
BOSCH MD1CP004 |
| — | — |
1.02.016 | 4G2907311G 0003 |
BOSCH MD1CP004 |
| — | — |
1.02.015 | 4G2907311G 0005 |
BOSCH MD1CP004 |
| — | — |
1.02.047 | 4G2907311B 0005 |
BOSCH MD1CP004 |
| — | — |
1.02.035 | 4G2907311B 0003 |
BOSCH MD1CP004 |
| — | — |
1.02.021 | 4G0997311C 0001 |
BOSCH MD1CP004 |
| — | — |
1.02.025 | 4G2907311B 0002 |
BOSCH MD1CP004 |
| — | — |
1.02.026 | 4G2907311G 0002 |
BOSCH MD1CP004 |
车辆技术说明
ECU located under the wipers, it may be necessary to remove the bulkhead and the wipers. Difficulty: medium.
ECU 说明
Microprocessor BGA FREESCALE SPC57xxx This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
