AUDI A6 (C4/4A) 2.8L VR6 142KW/193HP ME7.1

ECU BOSCH ME7.1/5 · 193 CV (142 kW) · 2800 cc · Benzina aspirato

ECU 数据库AUDI › AUDI A6 (C4/4A) 2.8L VR6 142KW/193HP ME7.1

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 6 固件版本

车辆数据

品牌AUDI
型号A6 (C4/4A)
发动机2.8L VR6 142KW/193HP ME7.1
原厂功率193 CV / 142 kW
排量2800 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.1/5
存储 / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

可用的调校选项:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Load/throttle position reference - AT
  • Air mass flow

固件标识 (6)

硬件号软件号 (chip)版本升级软件ECU
02612061241037350721 1.21.0083B0907551E 0002 BOSCH ME7.1/5
02612063921037352463 1.21.0063B0907551A 0001 BOSCH ME7.1/5
02612066451037374319 1.21.0113B0907551A 0050 BOSCH ME7.1/5
02612067831037354053 1.21.0083B0907551B 0002 BOSCH ME7.1/5
02612067861037354049 1.21.0103B0907551BC 0001 BOSCH ME7.1/5
02612070141037354172 1.21.0113B0907551BL 0001 BOSCH ME7.1/5

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.