AUDI A5 (8F/8T) 3.0L V6 24V TDI 176kW/236HP EDC17CP04 — ECU BOSCH EDC17CP04

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 13 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

车辆数据

品牌	AUDI
型号	A5 (8F/8T)
发动机	3.0L V6 24V TDI 176kW/236HP EDC17CP04
原厂功率	239 CV / 176 kW
排量	3000 cc
燃料	Diesel sovralimentato
车辆类型	Auto

ECU

制造商	BOSCH
型号	EDC17CP04
存储 / EPROM	MICRO ST TRICORE - 16384 Kbit - 200000

可用的调校选项:

Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Maximum torque limitation at clutch
EGR valve control
EGR valve control 2
EGR valve control 3
EGR valve control 4
Protection for engine overheating
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection period
Injection opening time related to inj. pressure
Initialization values over pressure control valve
J
Injection 2
L
Lambda reference
Minimum LSU sensor temperature limit - heater control
Minimum LSU sensor temperature for O2
Maximum LSU sensor temperature limit - heater control
Maximum LSU sensor temperature for O2
LSU temperature threshold PID heater governor activation
Speed limiter
Maximum indicated torque
Maximum indicated torque for monitoring
Protection for air load overheating
Protection for exhaust gas temperature before turbine
Protection for exhaust gas temperature before turbine 2
Protection for fuel overheating
Protection for oil overheating
Specific injection pressure limiter
Specific injection pressure limiter 2
Relative permissible torque from the pedal position in torque limitation
Specific injection pressure
Specific injection pressure 2
Specific injection pressure in aftertreatment modes
Specific pressure injection after starting
Driver torque request
Driver torque request for reverse gear
CAT downstream temperature sensor characterization
DPF downstream temperature sensor characterization
DPF upstream temperature sensor characterization
Turbo upstream temperature sensor characterization
Torque limiter for selected gear
Torque limiter for for reverse gear
Torque limiter for the APS/BPS
Torque model - torque to fuel quantity conversion - particulate regeneration mode
Variable geometry duty cycle limit
Variable geometry duty cycle limit 2
Variable geometry duty cycle limit 3
Variable geometry duty cycle limit in regeneration mode

固件标识 (13)

硬件号	软件号 (chip)	版本	升级软件	ECU
—	—	1.94.018	8K0907401F 0008	BOSCH EDC17CP04
—	—	1.94.005	8K0907401F 0006	BOSCH EDC17CP04
—	—	1.94.054	8K0907401F 0002	BOSCH EDC17CP04
—	—	1.94.035	8K0907401F 0004	BOSCH EDC17CP04
—	—	1.94.011	8K0907401 0011	BOSCH EDC17CP04
—	—	1.94.019	8K0907401 0008	BOSCH EDC17CP04
—	—	1.94.023	—	BOSCH EDC17CP04
—	—	1.94.018	8K0907401 0010	BOSCH EDC17CP04
—	—	1.94.009	8K0907401F 0005	BOSCH EDC17CP04
—	—	1.94.030	8K0907401 0009	BOSCH EDC17CP04
—	—	1.94.020	8K0907401F 0003	BOSCH EDC17CP04
—	—	1.94.019	8K0907401 7001	BOSCH EDC17CP04
—	—	1.94.029	8K0907401 0012	BOSCH EDC17CP04

车辆技术说明

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU 说明

MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. On this ECU it is NOT possible to use any BDM system (Trasdata nor 555pro).

MICRO Infineon Tricore TC1796 It is possible to support this ECU via OBDII using NewGenius and protocol FLASH_0506 WITHOUT PERFORMING the unlock patch and starting always from a 16Mbit TOTAL size file. To work on this ECU you can use NewTrasdata