ECU 数据库 ›
AUDI › AUDI A4 (B8/8K) 1.8L 16V TFSI 118kW/158HP MED17.5
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 19 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | A4 (B8/8K) |
| 发动机 | 1.8L 16V TFSI 118kW/158HP MED17.5 |
| 原厂功率 | 160 CV / 118 kW |
| 排量 | 1800 cc |
| 燃料 | Benzina sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | MED17.5 |
| 存储 / EPROM | MICRO ST TRICORE - 12032 Kbit - 178000 |
可用的调校选项:
- Maximum air charge for overboost protection with turbocharger fault
- Base timing
- Optimal spark timing/MBT
- Advance correction
- Height correction for boost pressure
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Maximum pressure ratio limit for diagnosis
- Exhaust gas temperature
- Filling factor limit
- Filling factor limit 2
- Factor for reducing maximum filling
- Gearbox maximum torque allowed
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- High fuel pressure pump limit
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- Torque limiter at high EGT
- RPM Limiter
- Lambda driver wish
- Knock detection factor
- Maximum boost pressure load
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Optimal engine moment
- Power limit torque table
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation - sport/race mode
- Pressure ratio depending on IAT
- Maximum pressure ratio limit depending on temperature
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Exhaust gas temperature sensor
- Throttle angle management
固件标识 (19)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.94.017 | 1Z0907115J 0030 |
BOSCH MED17.5 |
| — | — |
1.94.074 | 8K1907115D 0002 |
BOSCH MED17.5 |
| — | — |
1.94.041 | 8K1907115M 0004 |
BOSCH MED17.5 |
| — | — |
1.94.022 | 8K1907115M 0003 |
BOSCH MED17.5 |
| — | — |
1.94.016 | 8P7907115L 0030 |
BOSCH MED17.5 |
| — | — |
1.94.007 | 8K1907115A 0003 |
BOSCH MED17.5 |
| — | — |
1.94.030 | 1P0907115A 0020 |
BOSCH MED17.5 |
| — | — |
1.94.021 | 8K1907115K 0001 |
BOSCH MED17.5 |
| — | — |
1.94.009 | 8K1907115K 0003 |
BOSCH MED17.5 |
| — | — |
1.94.023 | 8K1907115J 0001 |
BOSCH MED17.5 |
| — | — |
1.94.013 | 1Z0907115C 0010 |
BOSCH MED17.5 |
| — | — |
1.94.017 | 8K1907115H 0002 |
BOSCH MED17.5 |
| — | — |
1.94.029 | 8K1907115M 0002 |
BOSCH MED17.5 |
| — | — |
1.94.018 | 8K1907115B 0001 |
BOSCH MED17.5 |
| — | — |
1.94.008 | 8K1907115B 0002 |
BOSCH MED17.5 |
| — | — |
1.94.020 | 8K1907115H 0001 |
BOSCH MED17.5 |
| — | — |
1.94.034 | 8K1907115A 0004 |
BOSCH MED17.5 |
| — | — |
1.94.017 | 8K1907115K 0002 |
BOSCH MED17.5 |
| — | — |
1.94.022 | 8K1907115G 0003 |
BOSCH MED17.5 |
车辆技术说明
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU 说明
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
