ECU 数据库 ›
AUDI › AUDI A4 (B7/8E/8H) 1.9L 8V TDI 85kW/114HP EDC16+
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 14 固件版本
车辆数据
| 品牌 | AUDI |
| 型号 | A4 (B7/8E/8H) |
| 发动机 | 1.9L 8V TDI 85kW/114HP EDC16+ |
| 原厂功率 | 116 CV / 85 kW |
| 排量 | 1900 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
可用的调校选项:
- Smoke limiter 2
- Main injection duration angle
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure in aftertreatment modes 3
- EGR valve control
- EGR valve control 2
- EGR valve control in aftertreatment modes
- EGR valve control in aftertreatment modes 2
- EGR valve control in aftertreatment modes 3
- EGR valve control in aftertreatment modes 4
- EGR valve control in aftertreatment modes 5
- EGR valve control in aftertreatment modes 6
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection period - correction
- Maximum injection period
- Max injection limit - limp mode
- Injection 1
- Injection in aftertreatment modes 1
- Torque limiter
- Smoke limiter
- RPM limiter - fuel cut
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation in aftertreatment modes
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Air mass flow
- Driver torque request
- Driver torque request 2
- Driver torque request AWD
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter for the APS/BPS 2
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
固件标识 (14)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | 1037383060 |
1.00.012 | 03G906016G 9577 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037380419 |
1.67.034 | 03G906016GD 8957 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037392909 |
1.00.025 | 03G906016GD 9897 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037390131 |
1.67.019 | 03G906016FE 9820 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037377587 |
1.67.032 | 03G906016JA 8002 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037390982 |
1.67.022 | 03G906016CL 9881 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037372733 |
1.67.032 | 03G906016FE 7002 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037384833 |
1.67.023 | 03G906016JA 8692 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037383060 |
1.00.029 | 03G906016GD 9577 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037371805 |
1.67.020 | 03G906016CJ 6413 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037379537 |
1.67.026 | 03G906016FD 8283 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037390149 |
1.00.023 | 03G906016LP 1356 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037392908 |
1.00.027 | 03G906016LP 1718 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037390131 |
1.67.016 | 03G906016FE 7002 |
BOSCH EDC16U31/U34/CP34 |
车辆技术说明
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU 说明
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.
