AUDI A4 (B6/8E/8H) 2.0L 8V 110kW/148HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 2000 cc · Benzina aspirato

ECU 数据库AUDI › AUDI A4 (B6/8E/8H) 2.0L 8V 110kW/148HP ME7.5

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 15 固件版本

车辆数据

品牌AUDI
型号A4 (B6/8E/8H)
发动机2.0L 8V 110kW/148HP ME7.5
原厂功率150 CV / 11 kW
排量2000 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.5
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Advance at part load
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

固件标识 (15)

硬件号软件号 (chip)版本升级软件ECU
02612060511037360623 1.21.0128E0907557 0005 BOSCH ME7.5
02612060511037360917 1.21.0128E0907557 0006 BOSCH ME7.5
02612072201037362556 1.21.0108E0909557C 0003 BOSCH ME7.5
02612072851037362543 1.21.0078E0909557 0003 BOSCH ME7.5
02612072861037360218 1.21.0098E0909557A 0001 BOSCH ME7.5
02612074011037360396 1.21.0148B0907557F 0006 BOSCH ME7.5
02612077531037363401 1.21.0108E0909557D 0002 BOSCH ME7.5
02612077561037363477 1.21.0158E0909557G 0003 BOSCH ME7.5
02612079751037366476 1.21.0118E0909557L 0002 BOSCH ME7.5
02612079771037366475 1.21.0178B0909557J 0002 BOSCH ME7.5
02612079771037363629 1.21.0078E0909557J 0001 BOSCH ME7.5
02612079781037363630 1.21.0138E0909557H 0001 BOSCH ME7.5
02612086901037372662 1.21.0138E0909557R 0010 BOSCH ME7.5
02612086911037372615 1.21.0178E0909557S 0020 BOSCH ME7.5
02612086921037372659 1.21.0128E1909557 0010 BOSCH ME7.5

车辆技术说明

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata