AUDI A3 (8Y) 2.0L 16V TDI 147kW/197HP MD1CS004

ECU BOSCH MD1CS004 · 200 CV (147 kW) · 2000 cc · Diesel sovralimentato

ECU 数据库AUDI › AUDI A3 (8Y) 2.0L 16V TDI 147kW/197HP MD1CS004

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 1 固件版本

车辆数据

品牌AUDI
型号A3 (8Y)
发动机2.0L 16V TDI 147kW/197HP MD1CS004
原厂功率200 CV / 147 kW
排量2000 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MD1CS004
存储 / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

可用的调校选项:

  • Boost pressure limiter
  • Boost limiter correction for APS/BPS sensor
  • Maximum torque limitation at clutch
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period limit
  • Injection opening time related to inj. pressure
  • Injection 2
  • Injection 3
  • Injection 4
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter
  • Smoke limiter
  • Lambda reference
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 3
  • Lambda value of the smoke limitation 4
  • Speed limiter
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 4
  • Specific air mass charge
  • Specific air mass charge 2
  • Q
  • Specific air mass charge 4
  • Driver torque request
  • Driver torque request 2
  • Driver torque request 3
  • Setpoint maximum turbocharger speed
  • Overboost timing
  • Overboost timing 2
  • Overboost timing 3
  • Overboost timing 5
  • Turbocharger volumetric efficiency

固件标识 (1)

硬件号软件号 (chip)版本升级软件ECU
1.02.00905L906022AC 0976 BOSCH MD1CS004

ECU 说明

Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata