ALFA ROMEO MiTo 1.4L 16V Multiair 77kW/104HP IAW8GF

ECU MARELLI 8GF · 105 CV (77 kW) · 1400 cc · Benzina sovralimentato

ECU 数据库ALFA ROMEO › ALFA ROMEO MiTo 1.4L 16V Multiair 77kW/104HP IAW8GF

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 3 固件版本

车辆数据

品牌ALFA ROMEO
型号MiTo
发动机1.4L 16V Multiair 77kW/104HP IAW8GF
原厂功率105 CV / 77 kW
排量1400 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商MARELLI
型号8GF
存储 / EPROMMICRO BGA MOTOROLA FRESCALE con FLASH interna 12288 Kbit - 0x180000

可用的调校选项:

  • Optimal spark timing/MBT
  • Advance at part load
  • Advance correction
  • Base lambda - cold
  • Base Lambda - hot
  • Boost pressure limiter
  • Electronic throttle control
  • Compressor pressure ratio limit for pumping and speed
  • Average power effective limitation
  • Average torque effective limitation
  • Advance limiter
  • Basic value setpoint Lambda sensor
  • RPM Limiter
  • Maximum Upstream pressure in event of Normal boost modality
  • Maximum Upstream pressure in event of normal boost modality, Sport mode activated
  • Maximum Upstream pressure in event of overboost modality
  • Maximum Upstream pressure in event of overboost modality, Sport modality activated
  • Max torque profile
  • Torque management in Normal mode
  • Torque management Sport mode
  • Power Control in Normal mode
  • Power Control in Sport mode
  • Power limit torque table
  • Resistant torque table
  • Torque limit table for ECT sensor
  • Take-off torque law in Normal mode
  • Take-off torque law in Normal mode with power control
  • Take-off torque law in Sport mode
  • Take-off torque law in Sport mode with power control
  • Wastegate duty-cycle

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
MM8GMFHW5021M10AA38 1.91.010 MARELLI 8GF
MM8GMFHW5021M10AA39 1.91.009 MARELLI 8GF
MM8GMFHW5021N00AA42 1.91.004 MARELLI 8GF

车辆技术说明

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU located on or behind the engine block. It may be necessary to remove the engine cover. Difficulty: easy.

ECU 说明

Microprocessor FMPC5553 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.