ABARTH GRANDE PUNTO 1.4L 16V TJET 114kW/153HP ME7.9.10

ECU BOSCH ME7.9.10 · 155 CV (114 kW) · 1400 cc · Benzina sovralimentato

ECU 数据库ABARTH › ABARTH GRANDE PUNTO 1.4L 16V TJET 114kW/153HP ME7.9.10

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 2 固件版本

车辆数据

品牌ABARTH
型号GRANDE PUNTO
发动机1.4L 16V TJET 114kW/153HP ME7.9.10
原厂功率155 CV / 114 kW
排量1400 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.9.10
存储 / EPROMMICRO ST - 6656 Kbit

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Boost pressure limiter 3
  • Boost pressure limiter 4
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Compression ratio for turbocharger protection
  • Desired pressure ratio
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum indicated torque
  • Throttle air mass flow calculation
  • Max torque profile
  • Optimal engine moment
  • Boost pressure threshold cycles for the overboost recognition
  • Offset tolerance depending on permissible torque
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management
  • Turbocharger volumetric efficiency
  • Wastegate duty-cycle

固件标识 (2)

硬件号软件号 (chip)版本升级软件ECU
02612016851037391129 1.91.032 BOSCH ME7.9.10
0261S046621037397661 1.91.034 BOSCH ME7.9.10

车辆技术说明

ECU located on or behind the engine block. It may be necessary to remove the engine cover. Difficulty: easy.
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU 说明

Microprocessor ST10F275 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata