VOLKSWAGEN TOUAREG (7P5) 3.0L V6 24V TFSI HYBRID 245kW/329HP MED17.1.6

ECU BOSCH MED17.1.6 · 333 CV (245 kW) · 3000 cc · Benzina sovralimentato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN TOUAREG (7P5) 3.0L V6 24V TFSI HYBRID 245kW/329HP MED17.1.6

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) 5 固件版本

车辆数据

品牌VOLKSWAGEN
型号TOUAREG (7P5)
发动机3.0L V6 24V TFSI HYBRID 245kW/329HP MED17.1.6
原厂功率333 CV / 245 kW
排量3000 cc
燃料Benzina sovralimentato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.6
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM Limiter 5
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Throttle angle management

固件标识 (5)

硬件号软件号 (chip)版本升级软件ECU
1.94.01106E906023B 8968 BOSCH MED17.1.6
1.94.00806E906023L 6261 BOSCH MED17.1.6
1.94.00706E906023K 1639 BOSCH MED17.1.6
1.94.00706E906023B 7728 BOSCH MED17.1.6
1.94.00806E906023H 6263 BOSCH MED17.1.6

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata