VOLKSWAGEN SCIROCCO 3 2.0L 16V TDI 103kW/138HP EDC17CP14 — ECU BOSCH EDC17CP14

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 26 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

车辆数据

品牌	VOLKSWAGEN
型号	SCIROCCO 3
发动机	2.0L 16V TDI 103kW/138HP EDC17CP14
原厂功率	140 CV / 103 kW
排量	2000 cc
燃料	Diesel sovralimentato
车辆类型	Auto

ECU

制造商	BOSCH
型号	EDC17CP14
存储 / EPROM	MICRO ST TRICORE - 16384 Kbit - 200000

可用的调校选项:

Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Maximum torque limitation at clutch
Regeneration limit for DPF
EGR valve control
EGR valve control 2
EGR valve control 3
Protection for engine overheating
Basic torque management at engine cranking
Basic torque management at engine cranking 2
Engine idle vs. ECT sensor
Injection period
Injection period 2
Injection period 3
Injection period 4
Injection opening time related to inj. pressure
Initialization values over pressure control valve
J
Speed / RPM limiter
Smoke limiter
Lambda reference
Lambda value of the smoke limitation
Minimum LSU sensor temperature limit - heater control
Minimum LSU sensor temperature for O2
Maximum LSU sensor temperature limit - heater control
Maximum LSU sensor temperature for O2
LSU temperature threshold PID heater governor activation
Speed limiter
Maximum indicated torque
Maximum indicated torque for monitoring
Protection for air load overheating
Protection for exhaust gas temperature before turbine
Protection for exhaust gas temperature before turbine 2
Protection for fuel overheating
Protection for oil overheating
Pressure control map over pressure regulating valve
Specific injection pressure limiter
Specific injection pressure limiter for EFT sensor
Relative permissible torque from the pedal position in torque limitation
Specific injection pressure
Specific injection pressure 2
Specific injection pressure in aftertreatment modes
Specific pressure injection after starting
Driver torque request
Driver torque request AWD
Driver torque request for reverse gear
CAT downstream temperature sensor characterization
DPF downstream temperature sensor characterization
DPF upstream temperature sensor characterization
Turbo upstream temperature sensor characterization
Torque limiter for selected gear
Torque limiter for for reverse gear
Setpoint maximum turbocharger speed
Torque limiter for the APS/BPS
Torque model - torque to fuel quantity conversion - particulate regeneration mode
Variable geometry duty cycle limit
Variable geometry duty cycle limit in regeneration mode

固件标识 (26)

硬件号	软件号 (chip)	版本	升级软件	ECU
—	—	1.00.009	03L906022KD 9276	BOSCH EDC17CP14
—	—	1.00.015	03L906022S 6165	BOSCH EDC17CP14
—	—	1.00.012	03L906022S 9977	BOSCH EDC17CP14
—	—	1.94.021	03L906022S 9978	BOSCH EDC17CP14
—	—	1.00.025	03L906022R 5669	BOSCH EDC17CP14
—	—	1.00.022	03L906022R 9977	BOSCH EDC17CP14
—	—	1.00.013	03L906022S 5670	BOSCH EDC17CP14
—	—	1.00.012	03L906022R 9979	BOSCH EDC17CP14
—	—	1.00.013	03L906022S 3513	BOSCH EDC17CP14
—	—	1.00.005	03L906022KD 9979	BOSCH EDC17CP14
—	—	1.00.013	03L906022S 3888	BOSCH EDC17CP14
—	—	1.00.010	03L906022KD 6166	BOSCH EDC17CP14
—	—	1.94.033	03L906022R 6164	BOSCH EDC17CP14
—	—	1.00.021	03L906022KE 3929	BOSCH EDC17CP14
—	—	1.94.018	03L906022R 3436	BOSCH EDC17CP14
—	—	1.00.005	03L906022KE 9978	BOSCH EDC17CP14
—	—	1.00.019	03L906022KD 3889	BOSCH EDC17CP14
—	—	1.00.017	03L906022R 3887	BOSCH EDC17CP14
—	—	1.00.011	03L906022KD 9977	BOSCH EDC17CP14
—	—	1.00.011	03L906022KD 5671	BOSCH EDC17CP14
—	—	1.00.014	03L906022R 9980	BOSCH EDC17CP14
—	—	1.00.005	03L997027G 0549	BOSCH EDC17CP14
—	—	1.00.017	03L906022S 9979	BOSCH EDC17CP14
—	—	1.00.006	03L906022KD 9978	BOSCH EDC17CP14
—	—	1.00.025	03L997027H 0562	BOSCH EDC17CP14
—	—	1.00.020	03L906022KE 6167	BOSCH EDC17CP14

ECU 说明

MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

MICRO Infineon Tricore TC1796 It is possible to support this ECU via OBDII using NewGenius and protocol FLASH_0506 WITHOUT PERFORMING the unlock patch and starting always from a 16Mbit TOTAL size file. To work on this ECU you can use NewTrasdata