VOLKSWAGEN JETTA 6 (A6) 2.0L 8V 85kW/114HP ME17.5.6

ECU BOSCH ME17.5.6 · 116 CV (85 kW) · 2000 cc · Benzina aspirato

ECU 数据库VOLKSWAGEN › VOLKSWAGEN JETTA 6 (A6) 2.0L 8V 85kW/114HP ME17.5.6

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 17 固件版本

车辆数据

品牌VOLKSWAGEN
型号JETTA 6 (A6)
发动机2.0L 8V 85kW/114HP ME17.5.6
原厂功率116 CV / 85 kW
排量2000 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME17.5.6
存储 / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Knock correction advance max
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Speed / RPM limiter
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Throttle angle management

固件标识 (17)

硬件号软件号 (chip)版本升级软件ECU
1.94.00506G906055C 1110 BOSCH ME17.5.6
1.94.00406G906055AE 1302 BOSCH ME17.5.6
1.94.00206G906055Q 1308 BOSCH ME17.5.6
1.94.00506G906055AG 1403 BOSCH ME17.5.6
1.94.00206G906055AE 1301 BOSCH ME17.5.6
1.94.00306G906055S 1106 BOSCH ME17.5.6
1.94.00206G906055AK 1405 BOSCH ME17.5.6
1.94.00606G906055R 1105 BOSCH ME17.5.6
1.94.00206G906055AH 1405 BOSCH ME17.5.6
1.94.00406G906055N 1308 BOSCH ME17.5.6
1.94.00806G906055B 1111 BOSCH ME17.5.6
1.94.00206G906055AA 1205 BOSCH ME17.5.6
1.94.00606G906055AD 1302 BOSCH ME17.5.6
1.94.00606G906055AN 1500 BOSCH ME17.5.6
1.94.00206G906055N 1207 BOSCH ME17.5.6
1.94.00206G906055AJ 1405 BOSCH ME17.5.6
1.94.00406G906055AJ 4372 BOSCH ME17.5.6

ECU 说明

MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop