YAMAHA MOTORCYCLES MT-09 Tracer 900 25->25 88kW

ECU DENSO Bxx-8591A-xx · 119 CV (88 kW) · 890 cc · Benzina aspirato

ECU duomenų bazėYAMAHA MOTORCYCLES › YAMAHA MOTORCYCLES MT-09 Tracer 900 25->25 88kW

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėYAMAHA MOTORCYCLES
ModelisMT-09 Tracer 900
Variklis25->25 88kW
Serijinė galia119 CV / 88 kW
Darbinis tūris890 cc
KurasBenzina aspirato
Transporto priemonės tipasMoto

ECU

GamintojasDENSO
ModelisBxx-8591A-xx
Atmintis / EPROMMicro RENESAS core RH850

Galimos derinimo operacijos / parinktys:

  • AFR full load/WOT
  • AFR for IAP
  • AFR for TPS
  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Allowed speed difference between axles - set A
  • Allowed speed difference between axles - set B
  • Allowed speed difference between axles - set C
  • Coil charge time
  • Engine brake
  • Engine idle vs. ECT sensor
  • Rpm threshold fuel cut
  • Rpm threshold fuel cut 2
  • Injection for IAP
  • Injection for TPS
  • RPM Limiter
  • Speed limiter
  • Optimal engine moment
  • Optimal engine moment 2
  • Throttle angle limitation
  • TAMCM
  • Throttle angle management - mode 1
  • TAMM
  • Throttle angle management - mode 3
  • Throttle angle management - mode 4
  • Cooling fan activation

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
129A5080 1.00.010BVU5_129A5080 DENSO Bxx-8591A-xx
129A5000 1.00.009BVU1_129A5000 DENSO Bxx-8591A-xx
12A23000 1.00.012BXS1_12A23000 DENSO Bxx-8591A-xx
129A6000 1.00.011BVV1_129A6000 DENSO Bxx-8591A-xx

ECU pastabos

Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata