VOLVO S80 Mk1 2.0L 20V TURBO 132kW/177HP ME7.0

ECU BOSCH ME7.0 · 179 CV (132 kW) · 2000 cc · Benzina sovralimentato

ECU duomenų bazėVOLVO › VOLVO S80 Mk1 2.0L 20V TURBO 132kW/177HP ME7.0

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 8 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLVO
ModelisS80 Mk1
Variklis2.0L 20V TURBO 132kW/177HP ME7.0
Serijinė galia179 CV / 132 kW
Darbinis tūris2000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.0
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Constant pressure control
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

Programinės įrangos identifikatoriai (8)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612045591037359462 1.46.00720FMFP.a2l BOSCH ME7.0
02612045591037359462 1.46.00920NKHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.01020n0MHde.a2l BOSCH ME7.0
02612045591037359462 1.46.0292010mhde.a2l BOSCH ME7.0
02612045591037359462 1.46.03120j0mgde.a2l BOSCH ME7.0
02612045591037359462 1.46.0182xEKMH.a2l BOSCH ME7.0
02612045591037359462 1.46.00920FWHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.02820j0mgde.a2l BOSCH ME7.0

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU located in the engine bay on the passenger's side. Difficulty: easy

ECU pastabos

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata