Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 34 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | VOLKSWAGEN |
| Modelis | PASSAT 7 (B7) |
| Variklis | 2.0L 16V TDI 125kW/168HP EDC17C46 |
| Serijinė galia | 170 CV / 125 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17C46 |
| Atmintis / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- EGR valve control 6
- EGR valve control 7
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 10
- Injection period 11
- IF1
- Injection period 13
- Injection period 14
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection period 8
- Injection period 9
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- Injection 2
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 3
- Speed limiter
- Max allowed torque for speed ratio
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Programinės įrangos identifikatoriai (34)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.00.020 | 03L906018PT 9980 |
BOSCH EDC17C46 |
| — | — |
1.00.005 | 03L906018NT 9984 |
BOSCH EDC17C46 |
| — | — |
1.00.003 | 03L906018BN 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.016 | 03L906018BN 9977 |
BOSCH EDC17C46 |
| — | — |
1.00.005 | 03L906018NC 9980 |
BOSCH EDC17C46 |
| — | — |
1.00.019 | 03L906018NT 2473 |
BOSCH EDC17C46 |
| — | — |
1.94.005 | 03L906018FE 8223 |
BOSCH EDC17C46 |
| — | — |
1.94.022 | 03L906018FF 8224 |
BOSCH EDC17C46 |
| — | — |
1.94.029 | 03L906018BN 8245 |
BOSCH EDC17C46 |
| — | — |
1.00.010 | 03L906018QE 4957 |
BOSCH EDC17C46 |
| — | — |
1.00.028 | 03L906018NC 4014 |
BOSCH EDC17C46 |
| — | — |
1.00.016 | 03L906018NC 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.009 | 03L906018BN 9954 |
BOSCH EDC17C46 |
| — | — |
1.94.006 | 03L906018BD 9979 |
BOSCH EDC17C46 |
| — | — |
1.94.011 | 03L906018BD 9977 |
BOSCH EDC17C46 |
| — | — |
1.00.013 | 03L997018A 9981 |
BOSCH EDC17C46 |
| — | — |
1.00.004 | 03L906018PC 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.009 | 03L997018C 9980 |
BOSCH EDC17C46 |
| — | — |
1.00.014 | 03L906018PC 4011 |
BOSCH EDC17C46 |
| — | — |
1.94.015 | 03L906018BD 9953 |
BOSCH EDC17C46 |
| — | — |
1.00.011 | 03L906018NC 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.015 | 03L906018NC 2755 |
BOSCH EDC17C46 |
| — | — |
1.00.009 | 03L906018NC 9979 |
BOSCH EDC17C46 |
| — | — |
1.00.015 | 03L906018PC 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.015 | 03L906018BH 9977 |
BOSCH EDC17C46 |
| — | — |
1.00.013 | 03L906018NC 2755 |
BOSCH EDC17C46 |
| — | — |
1.00.009 | 03L906018PC 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.036 | 03L906018BD 8244 |
BOSCH EDC17C46 |
| — | — |
1.00.015 | 03L906018NT 9980 |
BOSCH EDC17C46 |
| — | — |
1.00.010 | 03L906018QD 9977 |
BOSCH EDC17C46 |
| — | — |
1.00.012 | 03L906018NT 4010 |
BOSCH EDC17C46 |
| — | — |
1.00.022 | 03L906018PT 4009 |
BOSCH EDC17C46 |
| — | — |
1.94.008 | 03L906018BD 9981 |
BOSCH EDC17C46 |
| — | — |
1.00.011 | 03L906018NC Z109 |
BOSCH EDC17C46 |
ECU pastabos
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
