VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 110kW/148HP ME7.1.1

ECU BOSCH ME7.1.1 · 150 CV (11 kW) · 2500 cc · Benzina aspirato

ECU duomenų bazėVOLKSWAGEN › VOLKSWAGEN JETTA 5 (A5) 2.5L 20V 110kW/148HP ME7.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLKSWAGEN
ModelisJETTA 5 (A5)
Variklis2.5L 20V 110kW/148HP ME7.1.1
Serijinė galia150 CV / 11 kW
Darbinis tūris2500 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Speed / RPM limiter
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Speed limiter 2
  • Air mass flow

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612016791037517712 1.84.00507K906032BM 1113 BOSCH ME7.1.1
02612016791037500488 1.84.01207K906032BM 0812 BOSCH ME7.1.1
02612085411037376020 1.42.00506A906032QC 6654 BOSCH ME7.1.1
02612085521037376022 1.42.00906A906032QD 6655 BOSCH ME7.1.1

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop