Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 7 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | VOLKSWAGEN |
| Modelis | GOLF 6 (A6) |
| Variklis | 2.0L 16V TSI GTI 188kW/252HP DSG DQ250xxx TEMIC |
| Serijinė galia | 256 CV / 188 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | TEMIC |
| Modelis | DQ250 GEN1/MQB |
| Atmintis / EPROM | MICRO ST TRICORE - 12032 Kbit - 178000 |
Galimos derinimo operacijos / parinktys:
- Gear downshift 2->1
- Gear downshift 3->2
- Gear downshift 4->3
- Gear downhift 5->4
- Gear downshift 6->5
- Direct gear engagement time
- Vehicle max speed for upshifts
- Minimum RPM for the gear downshift
- Minimum rpm for gear upshifts
- Maximum time shift
- Time shift
- Time shift with torque reduction
- D-US
- Gear upshift 1->2 - NORMAL mode (D)
- Gear upshift 2->3
- Gear upshift 2->3 - NORMAL mode (D)
- Gear upshift 3->4
- Gear upshift 3->4 - NORMAL mode (D)
- Gear upshift 4->5
- Gear upshift 4->5 - NORMAL mode (D)
- Gear upshift 5->6
- Gear upshift 5->6 - NORMAL mode (D)
- E-DS
- Engagement time for overlapping gear downshift
- Gear upshift 1->2
- E-US
- Maximum torque limitation at clutch
- Gearbox torque limiter
- Gearbox torque limiter while taking off
- RPM limiter
- Engine speed limit at high oil temperature
- RPM limiter in limp mode
- RPM limiter - N
- Gearbox torque limiter for ECT sensor
- Engine torque limiter depending on vehicle speed
- Solenoid current for oil pressure
- Maximum solenoid current for maximum clutch torque
- Maximum allowable oil pressure
- Minimum oil pressure allowed at the clutch
- Maximum oil pressure allowed at the clutch
- Minimum oil pressure at filling
- Desired clutch oil pressure
- Maximum upshifting time for 2 gears
- Maximum upshifting time for 3 gears
- Maximum upshifting time for 4 gears
- O-DS
- Maximum clutch oil pressure
- Oil pressure during adaptations
- Oil pressure correction based on TOT
- Oil pressure required while moving
- Oil pressure based on torque
- Maximum time for gear downshift
- RPM for the engine stall with ESP ON
- RPM for the engine stall with ESP OFF
- Shift time with torque reduction
- Gear upshift 1->2 - SPORT mode (S)
- Gear upshift 2->3 - SPORT mode (S)
- S-US
- Gear upshift 3->4 - SPORT mode (S)
- Gear upshift 4->5 - SPORT mode (S)
- Gear upshift 5->6 - SPORT mode (S)
- Clutch torque limit during acceleration - gear R
- Clutch torque limit during acceleration - gear 1,3,5
- Clutch torque limit during acceleration - gear 2,4,6
- Gear downshift - limiter
- Gear upshift 1->2 limiter
- Gear upshift 1->2 - MANUAL mode
- Gear upshift 2->3 limiter
- Gear upshift 2->3 - MANUAL mode
- Gear upshift 3->4 limiter
- Gear upshift 3->4 - MANUAL mode
- Gear upshift 4->5 limiter
- Gear upshift 4->5 - MANUAL mode
- Gear upshift 5->6 limiter
- Gear upshift 5->6 - MANUAL mode
- Clutch torque variation during gear shifting
Programinės įrangos identifikatoriai (7)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
| 02E927770AL | v069L92602ec__getriebe_DSG_OcL9 |
1.94.021 | 02E300014S 3526 |
TEMIC DQ250 GEN1/MQB |
| 02E927770AL | v0697q1002ea__getriebe_DSG_Oc7q |
1.94.009 | 02E300013N 2610 |
TEMIC DQ250 GEN1/MQB |
| 02E927770AL | v069D22302ec__getriebe_DSG_OcD2 |
1.94.025 | 02E300014D 3123 |
TEMIC DQ250 GEN1/MQB |
| 02E927770AL | v069L92402ec__getriebe_DSG_OcL9 |
1.94.007 | 02E300014S 3524 |
TEMIC DQ250 GEN1/MQB |
| 02E927770AL | v0695f4902ec__getriebe_DSG_Oc5f |
1.94.012 | 02E300013 2249 |
TEMIC DQ250 GEN1/MQB |
| 02E927770AL | v0695f0502ea__getriebe_DSG_Oc5f |
1.94.008 | 02E300013 2205 |
TEMIC DQ250 GEN1/MQB |
| 02E927770AE | v0699A0102ea__getriebe_DSG_RD9A |
1.94.002 | 02E300050N 1401 |
TEMIC DQ250CXX |
ECU pastabos
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor MPC555 / 556 This Setting File can be used for serial system NewGenius.
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU