Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 28 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | VOLKSWAGEN |
| Modelis | CADDY MK3 (2K) |
| Variklis | 2.0L 16V TDI 75kW/101HP EDC17C64 |
| Serijinė galia | 102 CV / 75 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | LCV |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17C64 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Boost limiter correction for APS/BPS sensor
- Protection for cylinder head overheating
- Engine load - ceiling
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Engine idle vs. ECT sensor
- Engine idle vs. ECT sensor 2
- Engine idle vs. ECT sensor 3
- Engine idle vs. ECT sensor 4
- Injection period
- Injection period 2
- Injection period 3
- Injection period - correction
- Injection period - correction 2
- Maximum injection period
- Injection opening time related to inj. pressure
- J
- Boost pressure deviation limits for overboost detection
- Boost pressure deviation limit for underboost detection
- Torque limiter
- Smoke limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 4
- Lambda value of the smoke limitation 5
- Lambda value of the smoke limitation 6
- Speed limiter
- Maximum indicated torque
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Specific injection pressure limiter 5
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure limiter for EOT sensor
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation 2
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Specific air mass charge
- Specific air mass charge 2
- Specific air mass charge 3
- Specific air mass charge 4
- Specific air mass charge 5
- Q
- Specific air mass charge - correction
- Specific air mass charge - correction 2
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Setpoint maximum turbocharger speed
- Overboost timing
- Turbocharger volumetric efficiency
Programinės įrangos identifikatoriai (28)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.94.024 | 04L906016GJ 4653 |
BOSCH EDC17C64 |
| — | — |
1.94.003 | 04L906016GL 1671 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016PS 7069 |
BOSCH EDC17C64 |
| — | — |
1.94.031 | 04L906016GK 4649 |
BOSCH EDC17C64 |
| — | — |
1.94.020 | 04L906016MQ 4100 |
BOSCH EDC17C64 |
| — | — |
1.94.009 | 04L906016CB 4699 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906016HA 1804 |
BOSCH EDC17C64 |
| — | — |
1.94.011 | 04L906016PT 7070 |
BOSCH EDC17C64 |
| — | — |
1.94.032 | 04L906016MR 4099 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906016GL 4528 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016GF 4533 |
BOSCH EDC17C64 |
| — | — |
1.94.003 | 04L906016MA 3812 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906016DC 4574 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016HA 4646 |
BOSCH EDC17C64 |
| — | — |
1.94.014 | 04L906016GK 1667 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906016PM 7038 |
BOSCH EDC17C64 |
| — | — |
1.94.011 | 04L906016GT 4648 |
BOSCH EDC17C64 |
| — | — |
1.94.003 | 04L906016DT 1945 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906016DG 1943 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906016CB 1941 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906016GJ 1666 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906016DD 1773 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906016DC 1772 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016QB 0194 |
BOSCH EDC17C64 |
| — | — |
1.94.006 | 04L906016DJ 4534 |
BOSCH EDC17C64 |
| — | — |
1.94.003 | 04L906016DG 4526 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906016JS 6638 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906016CB 1420 |
BOSCH EDC17C64 |
ECU pastabos
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
