Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 30 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | VOLKSWAGEN |
| Modelis | CADDY MK3 (2K) |
| Variklis | 2.0L 16V TDI 110kW/148HP EDC17C64 |
| Serijinė galia | 150 CV / 11 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | LCV |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17C64 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Boost limiter correction for APS/BPS sensor
- Protection for cylinder head overheating
- Engine load - ceiling
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Engine idle vs. ECT sensor
- Engine idle vs. ECT sensor 2
- Engine idle vs. ECT sensor 3
- Engine idle vs. ECT sensor 4
- Injection period
- Injection period 2
- Injection period 3
- Injection period - correction
- Injection period - correction 2
- Maximum injection period
- Injection opening time related to inj. pressure
- J
- Boost pressure deviation limits for overboost detection
- Boost pressure deviation limit for underboost detection
- Torque limiter
- Smoke limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 4
- Lambda value of the smoke limitation 5
- Lambda value of the smoke limitation 6
- Speed limiter
- Maximum indicated torque
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Specific injection pressure limiter 5
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure limiter for EOT sensor
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation 2
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Specific air mass charge
- Specific air mass charge 2
- Specific air mass charge 3
- Specific air mass charge 4
- Specific air mass charge - correction
- Specific air mass charge - correction 2
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Setpoint maximum turbocharger speed
- Overboost timing
- Overboost timing 2
- Overboost timing 3
- Overboost timing 4
- Turbocharger volumetric efficiency
Programinės įrangos identifikatoriai (30)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.94.004 | 04L906016HB 1802 |
BOSCH EDC17C64 |
| — | — |
1.94.014 | 04L906016GN 4654 |
BOSCH EDC17C64 |
| — | — |
1.94.005 | 04L906016KM 6643 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016NC 4102 |
BOSCH EDC17C64 |
| — | — |
1.94.018 | 04L906016BS 1798 |
BOSCH EDC17C64 |
| — | — |
1.94.002 | 04L906016PC 7067 |
BOSCH EDC17C64 |
| — | — |
1.94.002 | 04L906016ER 4535 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016BR 1778 |
BOSCH EDC17C64 |
| — | — |
1.94.003 | 04L906016HC 4650 |
BOSCH EDC17C64 |
| — | — |
1.94.005 | 04L906016HB 4651 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016GQ 4645 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906016GN 1668 |
BOSCH EDC17C64 |
| — | — |
1.94.004 | 04L906016HC 1803 |
BOSCH EDC17C64 |
| — | — |
1.94.006 | 04L906016PH 7065 |
BOSCH EDC17C64 |
| — | — |
1.94.007 | 04L906016BR 4572 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906016PE 7068 |
BOSCH EDC17C64 |
| — | — |
1.94.010 | 04L906016PF 7071 |
BOSCH EDC17C64 |
| — | — |
1.94.006 | 04L906016BT 1797 |
BOSCH EDC17C64 |
| — | — |
1.94.017 | 04L906016GQ 1799 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906016KN 6644 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906016ND 4101 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906016BQ 4570 |
BOSCH EDC17C64 |
| — | — |
1.94.013 | 04L906016BS 4644 |
BOSCH EDC17C64 |
| — | — |
1.94.009 | 04L906016NB 4103 |
BOSCH EDC17C64 |
| — | — |
1.94.016 | 04L906016BQ 1849 |
BOSCH EDC17C64 |
| — | — |
1.94.006 | 04L906016KQ 6575 |
BOSCH EDC17C64 |
| — | — |
1.94.012 | 04L906016PG 7063 |
BOSCH EDC17C64 |
| — | — |
1.94.005 | 04L906016MN 4094 |
BOSCH EDC17C64 |
| — | — |
1.94.011 | 04L906016MM 4095 |
BOSCH EDC17C64 |
| — | — |
1.94.002 | 04L906016BQ 1418 |
BOSCH EDC17C64 |
ECU pastabos
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
