VOLKSWAGEN CADDY MK3 (2K) 1.4L 16V 59kW/79HP ME7.5.10

ECU BOSCH ME7.1.1 · 80 CV (59 kW) · 1400 cc · Benzina aspirato

ECU duomenų bazėVOLKSWAGEN › VOLKSWAGEN CADDY MK3 (2K) 1.4L 16V 59kW/79HP ME7.5.10

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLKSWAGEN
ModelisCADDY MK3 (2K)
Variklis1.4L 16V 59kW/79HP ME7.5.10
Serijinė galia80 CV / 59 kW
Darbinis tūris1400 cc
KurasBenzina aspirato
Transporto priemonės tipasLCV

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Speed limiter 2
  • Air mass flow

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612015751037394783 1.84.00406G906022B 2541 BOSCH ME7.1.1
02612011261037376353 1.42.003036906032BD 7295 BOSCH ME7.5.10
02612080461037369752 1.42.015036906032AB 5725 BOSCH ME7.5.10
02612087561037374089 1.42.008036906032AQ 7000 BOSCH ME7.5.10

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop