VOLKSWAGEN BORA A4 2.8L VR6 8V 150kW/201HP ME7.1/7.1.1

ECU BOSCH ME7.1.1 · 204 CV (15 kW) · 2800 cc · Benzina aspirato

ECU duomenų bazėVOLKSWAGEN › VOLKSWAGEN BORA A4 2.8L VR6 8V 150kW/201HP ME7.1/7.1.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 9 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLKSWAGEN
ModelisBORA A4
Variklis2.8L VR6 8V 150kW/201HP ME7.1/7.1.1
Serijinė galia204 CV / 15 kW
Darbinis tūris2800 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Programinės įrangos identifikatoriai (9)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612073461037366130 1.21.011022906032BL 0011 BOSCH ME7.1.1
02612073471037362580 1.21.011022906032BJ 0002 BOSCH ME7.1.1
02612078811037361454 1.21.013022906032CS 0004 BOSCH ME7.1.1
02612078821037361444 1.21.009022906032CR 0004 BOSCH ME7.1.1
02612078831037363435 1.21.004022906032AD 0001 BOSCH ME7.1.1
02612064861037352424 1.21.014021906018M V05 BOSCH ME7.1/1
02612066181037352480 1.21.015021906018Q V002 BOSCH ME7.1/1
02612068141037360624 1.21.0110219060018R 0004 BOSCH ME7.1/1
02612047391037350063 1.21.022021906018B V06 BOSCH ME7.1/5

ECU pastabos

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!