SEAT IBIZA (6K) 1.9L 8V TDI 75kW/101HP EDC15 P/P+

ECU BOSCH EDC15P+ · 102 CV (75 kW) · 1900 cc · Diesel sovralimentato

ECU duomenų bazėSEAT › SEAT IBIZA (6K) 1.9L 8V TDI 75kW/101HP EDC15 P/P+

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 10 programinės įrangos versijos

Transporto priemonės duomenys

MarkėSEAT
ModelisIBIZA (6K)
Variklis1.9L 8V TDI 75kW/101HP EDC15 P/P+
Serijinė galia102 CV / 75 kW
Darbinis tūris1900 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisEDC15P+
Atmintis / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Galimos derinimo operacijos / parinktys:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Air mass flow
  • Overboost timing

Programinės įrangos identifikatoriai (10)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02810109471037363697 1.40.025038906019HT 1503 BOSCH EDC15P+
02810109571037363252 1.40.007038906019HQ 1531 BOSCH EDC15P+
02810109571037363252 1.40.006038906019HQ 1531 BOSCH EDC15P+
02810109571037351915 1.40.013038906019HQ 1502 BOSCH EDC15P+
02810109571037351915 1.40.011038906019HQ 1502 BOSCH EDC15P+
02810112191037368184 1.40.005038906019KT 5213 BOSCH EDC15P+
02810118241037371258 1.40.008038906019NE 6119 BOSCH EDC15P+
02810122761037377186 1.40.010038906019NL 7458 BOSCH EDC15P+
02810122761037375965 1.40.003038906019NL 7325 BOSCH EDC15P+
02810150481037392958 1.40.005038906019MA 2193 BOSCH EDC15P+

ECU pastabos

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial programming system NewGenius.