PORSCHE CAYENNE (92A) 3.6L V6 24V 221kW/296HP MED17.1.6

ECU BOSCH MED17.1.6 · 300 CV (221 kW) · 3600 cc · Benzina aspirato

ECU duomenų bazėPORSCHE › PORSCHE CAYENNE (92A) 3.6L V6 24V 221kW/296HP MED17.1.6

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 22 programinės įrangos versijos

Transporto priemonės duomenys

MarkėPORSCHE
ModelisCAYENNE (92A)
Variklis3.6L V6 24V 221kW/296HP MED17.1.6
Serijinė galia300 CV / 221 kW
Darbinis tūris3600 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.1.6
Atmintis / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system 2
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM/speed limiter 2
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM Limiter 5
  • RPM Limiter 6
  • Lambda driver wish
  • Knock detection factor
  • MAF sensor calibration
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Torque limiter for selected gear
  • Throttle angle management

Programinės įrangos identifikatoriai (22)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.00.01295860162603 1234 BOSCH MED17.1.6
1.00.01295860162207 1380 BOSCH MED17.1.6
1.00.00595860162805 1331 BOSCH MED17.1.6
1.00.00295860162004 1285 BOSCH MED17.1.6
1.00.00595860163704 2823 BOSCH MED17.1.6
1.00.00495860163707 3557 BOSCH MED17.1.6
1.00.00295860162605 1312 BOSCH MED17.1.6
1.00.01195860162609 2038 BOSCH MED17.1.6
1.00.00495860162508 1618 BOSCH MED17.1.6
1.00.00695860162607 1384 BOSCH MED17.1.6
1.00.00695860162009 2032 BOSCH MED17.1.6
1.00.00495860162408 1617 BOSCH MED17.1.6
1.00.01395860163605 2934 BOSCH MED17.1.6
1.00.00495860163905 2937 BOSCH MED17.1.6
1.00.00795860162409 2036 BOSCH MED17.1.6
1.00.00495860162209 2034 BOSCH MED17.1.6
1.00.01195860162406 1376 BOSCH MED17.1.6
1.00.01195860163706 3434 BOSCH MED17.1.6
1.00.01095860162809 2040 BOSCH MED17.1.6
1.00.00695860163705 2935 BOSCH MED17.1.6
1.00.00995860162204 1286 BOSCH MED17.1.6
1.00.00595860163604 2822 BOSCH MED17.1.6

ECU pastabos

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop