Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 21 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | OPEL / SATURN / VAUXHALL |
| Modelis | ANTARA |
| Variklis | 2.0L 16V CDTI 110kW/148HP EDC16C39 |
| Serijinė galia | 150 CV / 11 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16C39 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Torque limiter 3
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limit table for IAT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Volumetric efficiency
- Volumetric efficiency - correction
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Programinės įrangos identifikatoriai (21)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 0123456789P465.V60 |
1.67.019 | DBM460O4M1 |
BOSCH EDC16C39 |
| — | 1037381795P465_V44 |
1.67.014 | DAA444O4M7 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.022 | DAM450O4M6 |
BOSCH EDC16C39 |
| — | 96950947 P465_V66 |
1.67.023 | DAM466S4M2 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.026 | DAA466O4M3 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.016 | DAM466O4M2 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.002 | DAM450O4M5 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.009 | DAA466O4M4 |
BOSCH EDC16C39 |
| — | 0123456789P465.V60 |
1.67.004 | DAA460O4M3 |
BOSCH EDC16C39 |
| — | 96950947 P465_V66 |
1.67.017 | DAA466N4M2 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.015 | DAA450O4M1 |
BOSCH EDC16C39 |
| — | 0123456789P465.V60 |
1.67.017 | DAM460S4M4 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.015 | DAM466S4M1 |
BOSCH EDC16C39 |
| — | 25181343 P465_V70 |
1.67.017 | DAA470O4M1 |
BOSCH EDC16C39 |
| — | 96950947 P465_V66 |
1.67.005 | DAM466U4M2 |
BOSCH EDC16C39 |
| — | 0123456789P465.V60 |
1.67.022 | DAA460S4M4 |
BOSCH EDC16C39 |
| — | 1037376659P465_V4B |
1.67.017 | DAA44BO4M1 |
BOSCH EDC16C39 |
| — | 25181343 P465_V70 |
1.67.019 | DAM270O4M2 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.029 | DAA450O4M1 |
BOSCH EDC16C39 |
| — | 96858577 P465_V50 |
1.67.002 | DAA450O4M4 |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.009 | DAM466O4M3 |
BOSCH EDC16C39 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU pastabos
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Galimi papildomi moduliai
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
