MAZDA 2 (DE) 1.6L 16V MZR-CD 66kW/89HP EDC16C34
ECU BOSCH EDC16C34 · 90 CV (66 kW) · 1600 cc · Diesel sovralimentato
ECU duomenų bazė ›
MAZDA › MAZDA 2 (DE) 1.6L 16V MZR-CD 66kW/89HP EDC16C34
Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 3 programinės įrangos versijos
Gaukite failą šiai transporto priemonei
Transporto priemonės duomenys
| Markė | MAZDA |
| Modelis | 2 (DE) |
| Variklis | 1.6L 16V MZR-CD 66kW/89HP EDC16C34 |
| Serijinė galia | 90 CV / 66 kW |
| Darbinis tūris | 1600 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16C34 |
| Atmintis / EPROM | Am29BDD160G PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure in aftertreatment modes
- Boost pressure F (temperature)
- EGR valve control
- EGR valve control 2
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Torque limiter 2
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear - AT
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Variable geometry duty cycle limit in regeneration mode
- Variable geometry duty cycle limit in regeneration mode 2
Programinės įrangos identifikatoriai (3)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|---|---|---|---|
| — | 1037400537 | 1.67.010 | 1037501056 | BOSCH EDC16C34 |
| — | 1037400537 | 1.67.031 | 1037400537 | BOSCH EDC16C34 |
| — | 1037399612 | 1.67.007 | — | BOSCH EDC16C34 |
ECU pastabos
EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 563/4 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Galimi papildomi moduliai
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
Kiti MAZDA
MX-3
1.8L V6 97kW/130HP MX-5 (NA)
1.6L 16V 66kW/89HP DENSO MX-5 (NB)
1.8L 16V 96kW/129HP DENSO XEDOS 6
2.0L V6 104kW/140HP DENSO 323 (BJ)
1.6L 16V 72kW/97HP DENSO 6/ATENZA (GG)
2.0L 16V MZR-CD 89kW/119HP DENSO 6/ATENZA (GG)
2.0L 16V MZR-CD 100kW/134HP DENSO 323 (BJ)
1.8L 16V 90kW/121HP DENSO 323 (BJ)
2.0L 16V GTR 106kW/142HP DENSO 2 (DY)
1.4L 8V MZR-CD 50kW/67HP SID804/802
1.8L V6 97kW/130HP MX-5 (NA)
1.6L 16V 66kW/89HP DENSO MX-5 (NB)
1.8L 16V 96kW/129HP DENSO XEDOS 6
2.0L V6 104kW/140HP DENSO 323 (BJ)
1.6L 16V 72kW/97HP DENSO 6/ATENZA (GG)
2.0L 16V MZR-CD 89kW/119HP DENSO 6/ATENZA (GG)
2.0L 16V MZR-CD 100kW/134HP DENSO 323 (BJ)
1.8L 16V 90kW/121HP DENSO 323 (BJ)
2.0L 16V GTR 106kW/142HP DENSO 2 (DY)
1.4L 8V MZR-CD 50kW/67HP SID804/802