JETOUR X70 1.5L 16V TURBO 112kW/150HP MED17.8.10

ECU BOSCH ME17/MED17.8.10 · 152 CV (112 kW) · 1500 cc · Benzina sovralimentato

ECU duomenų bazėJETOUR › JETOUR X70 1.5L 16V TURBO 112kW/150HP MED17.8.10

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėJETOUR
ModelisX70
Variklis1.5L 16V TURBO 112kW/150HP MED17.8.10
Serijinė galia152 CV / 112 kW
Darbinis tūris1500 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME17/MED17.8.10
Atmintis / EPROMMICRO ST TRICORE - 12288 Kbit - 180000

Galimos derinimo operacijos / parinktys:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Knock correction advance max
  • Boost pressure
  • Boost pressure 2
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Factor for reducing maximum filling
  • Engine idle vs. ECT sensor
  • Advance limiter for component protection 1
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Max torque profile (overboost active)
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation 2
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Driver torque request City mode - AT
  • Driver torque request Normal mode - AT
  • Driver torque request Sport mode - AT
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Throttle angle limitation
  • Throttle angle management
  • Turbocharger volumetric efficiency
  • Wastegate duty-cycle

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
F01R0AD4SZ 1.94.007F21AD1AA06 BOSCH ME17/MED17.8.10
F21CD1A7A6 1.94.040F21CD1A7A6 BOSCH ME17/MED17.8.10
F01R0ADN1U 1.94.041G21203BZ02 BOSCH ME17/MED17.8.10
F01R0ADJ9C 1.94.013G21203BW01 BOSCH ME17/MED17.8.10

ECU pastabos

Microprocessor TC1728 This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata