Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 13 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | HYUNDAI |
| Modelis | GETZ |
| Variklis | 1.5L CRDi 81kW/109HP EDC16C39 |
| Serijinė galia | 110 CV / 81 kW |
| Darbinis tūris | 1500 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16C39 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Maximum indicated torque
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Programinės įrangos identifikatoriai (13)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 1037377907 |
1.67.003 | P373602I |
BOSCH EDC16C39 |
| — | 1037394287 |
1.67.012 | P373C00I |
BOSCH EDC16C39 |
| — | 1037383171 |
1.67.012 | P373A10I |
BOSCH EDC16C39 |
| — | 1037380474 |
1.67.025 | P373701I |
BOSCH EDC16C39 |
| — | 1037377909 |
1.67.019 | P373602I |
BOSCH EDC16C39 |
| — | 1037383173 |
1.67.016 | P373A10I |
BOSCH EDC16C39 |
| — | 1037383151 |
1.67.004 | P373A10I |
BOSCH EDC16C39 |
| — | 1037383176 |
1.67.005 | P373A10N |
BOSCH EDC16C39 |
| — | 1037380472 |
1.67.013 | P373701I |
BOSCH EDC16C39 |
| — | 1037380861 |
1.67.006 | P373701I |
BOSCH EDC16C39 |
| — | 1037379606 |
1.67.012 | P373602I |
BOSCH EDC16C39 |
| — | 1037394295 |
1.67.015 | P373C00I |
BOSCH EDC16C39 |
| — | 1037383175 |
1.67.017 | P373A10I |
BOSCH EDC16C39 |
Techninės pastabos apie automobilį
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU pastabos
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Galimi papildomi moduliai
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
