Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 12 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | HYUNDAI |
| Modelis | ACCENT MK3 |
| Variklis | 1.5L 12V CRDi 81kW/109HP EDC16+ |
| Serijinė galia | 110 CV / 81 kW |
| Darbinis tūris | 1500 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16C39 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Maximum indicated torque
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Programinės įrangos identifikatoriai (12)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 1037379262 |
1.67.015 | P373602I |
BOSCH EDC16C39 |
| — | 1037516135 |
1.67.005 | P373C00I |
BOSCH EDC16C39 |
| — | 1037394279 |
1.67.006 | P373C00N |
BOSCH EDC16C39 |
| — | 1037384505 |
1.67.005 | P373A10N |
BOSCH EDC16C39 |
| — | 1037380479 |
1.67.012 | P373701I |
BOSCH EDC16C39 |
| — | 1037394281 |
1.67.003 | P373C00N |
BOSCH EDC16C39 |
| — | 1037382779 |
1.67.010 | P373602N |
BOSCH EDC16C39 |
| — | 1037516134 |
1.67.004 | P373A10I |
BOSCH EDC16C39 |
| — | 1037391467 |
1.67.003 | P373602I |
BOSCH EDC16C39 |
| — | 1037384502 |
1.67.016 | P373A10I |
BOSCH EDC16C39 |
| — | 1037515189 |
1.67.010 | P373E30I |
BOSCH EDC16C39 |
| — | 1037398468 |
1.67.007 | P373E30I |
BOSCH EDC16C39 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU pastabos
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
