Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 6 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | FORD |
| Modelis | TOURNEO CUSTOM |
| Variklis | 2.2L TDCI 114kW/153HP SID208 |
| Serijinė galia | 155 CV / 114 kW |
| Darbinis tūris | 2200 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | CONTINENTAL-SIEMENS-VDO |
| Modelis | SID208 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure limit control
- Boost pressure precontrol value
- Boost pressure
- Boost pressure 2
- Protection for cylinder head overheating
- Correction for boost pressure
- Exhaust gas temperature
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Gearbox maximum torque allowed
- Injection opening time related to inj. pressure
- Inverse first duration injection map for monitoring
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Torque limiter for smoke limitation
- Smoke limiter
- RPM Limiter
- RPM limiter - Low gears
- Speed limiter
- Maximum indicated torque
- Torque/load reduction for overheating protection
- Specific injection pressure limiter
- Specific injection pressure
- Air mass flow
- Driver torque request - low range
- Requested crankshaft/transmission torque
- Requested cranckshaft torque - low range
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Max torque limitation in Neutral (N)
- Torque limiter for for reverse gear
- Start of injection
- Start of injection 2
- Torque limiter for the APS/BPS
- Torque limiter for EFT sensor
- Torque limit table for EOT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limitation - turbocharger protection
- Torque limitation - turbocharger protection 2
- Torque model - fuel quantity to torque conversion
- Torque model - torque to fuel quantity conversion
- Torque model - torque to fuel quantity conversion 2
- Turbocharger volumetric efficiency
Programinės įrangos identifikatoriai (6)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
| BK2A-12B684-AB | BK21-12A650-AB |
1.47.010 | BK21-14C204-BDV |
CONTINENTAL-SIEMENS-VDO SID208 |
| BK2A-12B684-BC | BK21-12A650-AC |
1.37.017 | BK21-14C204-BVS |
CONTINENTAL-SIEMENS-VDO SID208 |
| BK2A-12B684-BC | BK21-12A650-AC |
1.37.007 | BK21-14C204-BVN |
CONTINENTAL-SIEMENS-VDO SID208 |
| BK2A-12B684-BC | BK21-12A650-AC |
1.37.008 | BK21-14C204-BVT |
CONTINENTAL-SIEMENS-VDO SID208 |
| CC11-12B684-AC | CC11-12A650-AC |
1.47.003 | CC11-14C204-DPP |
CONTINENTAL-SIEMENS-VDO SID208 |
| CC11-12B684-AC | CC11-12A650-AC |
1.47.010 | CC11-14C204-EPP |
CONTINENTAL-SIEMENS-VDO SID208 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU pastabos
MICRO Infineon Tricore TC1797 This Setting File can be used for serial system NewGenius. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU