Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 9 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | FORD |
| Modelis | FUSION Mk1 |
| Variklis | 1.6L 16V TDCi 66kW/89HP EDC16C34 |
| Serijinė galia | 90 CV / 66 kW |
| Darbinis tūris | 1600 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16C34 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure in aftertreatment modes
- Boost pressure F (temperature)
- EGR valve control
- EGR valve control 2
- Basic torque management at engine cranking
- Injection period
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection period in aftertreatment modes
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Torque limiter 2
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- Driver torque request 2
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Variable geometry duty cycle limit in regeneration mode
Programinės įrangos identifikatoriai (9)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 1037377399 |
1.67.012 | 1037377399 |
BOSCH EDC16C34 |
| — | 1037383007 |
1.67.021 | 1037383007 |
BOSCH EDC16C34 |
| — | 1037374716 |
1.67.007 | 1037375124 |
BOSCH EDC16C34 |
| — | 1037379267 |
1.67.011 | 1037383007 |
BOSCH EDC16C34 |
| — | 1037377399 |
1.67.011 | 1037383005 |
BOSCH EDC16C34 |
| — | 1037379268 |
1.67.003 | 1037379268 |
BOSCH EDC16C34 |
| — | 1037383006 |
1.67.002 | 1037383006 |
BOSCH EDC16C34 |
| — | 1037374715 |
1.67.016 | 1037374715 |
BOSCH EDC16C34 |
| — | 1037374401 |
1.67.009 | 1037513457 |
BOSCH EDC16C34 |
Techninės pastabos apie automobilį
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU pastabos
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
EPROM AM29BDD160G / S29CD016G PQFQ 80 Pin - Microprocessor MPC 563/4 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Galimi papildomi moduliai
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
