FORD FIESTA Mk8 1.0L 12V Ecoboost 93kW/125HP MG1CS016

ECU BOSCH MG1CS016 · 127 CV (93 kW) · 1000 cc · Benzina sovralimentato

ECU duomenų bazėFORD › FORD FIESTA Mk8 1.0L 12V Ecoboost 93kW/125HP MG1CS016

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 10 programinės įrangos versijos

Transporto priemonės duomenys

MarkėFORD
ModelisFIESTA Mk8
Variklis1.0L 12V Ecoboost 93kW/125HP MG1CS016
Serijinė galia127 CV / 93 kW
Darbinis tūris1000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMG1CS016
Atmintis / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 384Kbyte

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Max threshold air mass flow throught compressor
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Part pedal combustion load limit
  • Compressor pressure ratio limit for pumping and speed
  • Engine indicated torque at stoichiometric
  • Lambda enrichment - open loop
  • Max desired pressure ratio limit
  • Lambda driver wish
  • Lambda driver wish 2
  • Knock detection factor
  • Load limit at high effectiveness of LSPI mitigation
  • Load limit at low effectiveness of LSPI mitigation
  • Load limit at nominal effectiveness of LSPI mitigation
  • Maximum advance allowed
  • Intake manifold pressure
  • Maximum indicated torque
  • Maximum indicated torque for monitoring
  • Maximum indicated torque (overboost active)
  • Minimum indicated torque for monitoring
  • Max load
  • Max load at WOT
  • Maximum intake manifold pressure
  • Maximum throttle angle opening for a given RPM
  • Overall LSPI load limit
  • Percent accelerator pedal angle to desired throttle angle
  • Pressure ratio limit for overboost detection
  • Requested crankshaft/transmission torque
  • Driver torque request for the transmission - 1st gear
  • Driver torque request for the transmission - 2th gear
  • Driver torque request for the transmission - 3th gear
  • Driver torque request for the transmission - 4th gear
  • Driver torque request for the transmission - 5th gear
  • Driver torque request for the transmission - 6th gear
  • Wastegate duty-cycle
  • Max tip at wastegate

Programinės įrangos identifikatoriai (10)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
LA6A-12B684-ABL1T1-12A650-TA 1.94.011L1B1-14C204-UF BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-UA 1.94.013L1B1-14C204-YG BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-UA 1.94.009L1B1-14C204-ZG BOSCH MG1CS016
LA6A-12B684-ABL1T1-12A650-UA 1.94.013L1B1-14C204-YF BOSCH MG1CS016
LX6A-12B684-VAL1T1-12A650-LA 1.94.016L1B1-14C204-EJ BOSCH MG1CS016
LX6A-12B684-VAL1T1-12A650-LA 1.94.027L1B1-14C204-EE BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-HB 1.94.009N1T1-14C204-EC BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-HB 1.94.011P1T1-14C204-AC BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-HB 1.94.016N1B1-14C204-FD BOSCH MG1CS016
MX7A-12B684-MAM1T1-12A650-HB 1.94.007N1B1-14C204-FC BOSCH MG1CS016

ECU pastabos

Micro Infineon Tricore TC275TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata