BMW X5 SERIES E53 X5i 4.4L V8 32V 210kW/282HP DME7.1

ECU BOSCH DME 7.1 · 286 CV (21 kW) · 4400 cc · Benzina aspirato

ECU duomenų bazėBMW › BMW X5 SERIES E53 X5i 4.4L V8 32V 210kW/282HP DME7.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 11 programinės įrangos versijos

Transporto priemonės duomenys

MarkėBMW
ModelisX5 SERIES E53
VariklisX5i 4.4L V8 32V 210kW/282HP DME7.1
Serijinė galia286 CV / 21 kW
Darbinis tūris4400 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisDME 7.1
Atmintis / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Speed limiter
  • Load/throttle position reference - AT
  • Air mass flow

Programinės įrangos identifikatoriai (11)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.19.010 BOSCH DME 7.1
02612046201037368125 1.19.004 BOSCH DME 7.1
02612046201037350516 1.19.015 BOSCH DME 7.1
02612046201037365065 1.19.005 BOSCH DME 7.1
02612071061037350579 1.19.005 BOSCH DME 7.1
02612071061037351598 1.19.007 BOSCH DME 7.1
02612071061037350579 1.19.016 BOSCH DME 7.1
02612071061037368126 1.19.004 BOSCH DME 7.1
02612071061037350579 1.19.013 BOSCH DME 7.1
02612071061037351657 1.19.010 BOSCH DME 7.1
02612071061037365064 1.19.009 BOSCH DME 7.1

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.