ECU duomenų bazė ›
BMW › BMW 2 SERIES F22/F23/F44/F45/F46 225xe 1.5L L3 12V 100kW/134HP MEVD17.2.3
Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 1 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | BMW |
| Modelis | 2 SERIES F22/F23/F44/F45/F46 |
| Variklis | 225xe 1.5L L3 12V 100kW/134HP MEVD17.2.3 |
| Serijinė galia | 136 CV / 1 kW |
| Darbinis tūris | 1500 cc |
| Kuras | Hybrid |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | MEVD17.2.3 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 - 400000 |
Galimos derinimo operacijos / parinktys:
- Spark advance correction for soundtuning - nomal mode
- Spark advance correction for soundtuning - sport mode
- Base timing
- Minimum advance allowed protection - motore caldo
- Lambda/AFR full load/WOT
- Lambda/AFR mixture at part load
- Boost pressure limiter for diagnostics 2
- Engine torque reducing factor depending on engine speed
- Engine torque reducing factor depending on temperature
- HFM/HLM threshold for diagnosis
- High pressure fuel pump setpoint
- High pressure fuel pump setpoint - cold condition
- High pressure fuel pump setpoint - full load
- High pressure fuel pump setpoint - limp home mode
- Intake pressure protection
- Intake valve lift
- Intake valve lift - cold
- Intake valve lift - cold 2
- Intake valve lift - cold 3
- Intake valve lift - limit
- Intake valve lift - warm
- L
- Advance limiter - emergency
- Basic value Lambda sensor
- Basic value setpoint Lambda sensor
- Torque limiter
- Lambda enrichment - open loop
- Lambda minimum value for components protection
- Lambda fat-running limit for component protection
- RPM Limiter 2
- Knock detection factor
- Maximum possible engine charge
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Maximum rail pressure at start-up
- Pressure ratio depending on IAT
- Specific pressure injection after starting
- Turbo pressure variation control factor
- Requested engine filling
- Driver torque request
- Driver torque request Eco mode - AT
- Driver torque request Eco mode - AT - 2
- Driver torque request Normal mode - AT
- Driver torque request Sport mode - AT
- Driver torque request Sport mode - AT - 2
- Driver torque request Eco mode
- Driver torque request Eco mode - MT
- Driver torque request Eco mode - MT - 2
- Driver torque request Normal mode - MT
- Driver torque request Sport mode - MT
- Driver torque request Sport mode
- Maximum threshold for detecting engine knock
- Start of injection
- Maximum upper tolerance intake pressure protection
- Lower pressure control threshold
- Theoretical maximum engine power
- Turbo pressure sensor - lower threshold
- Upper engine rpm threshold for diagnostic control
- Upper pressure control threshold
- Wastegate duty-cycle
Programinės įrangos identifikatoriai (1)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| 00003DE7023B04 | 00002B2A8B1E01 |
1.98.005 | 000054BF8B1E04 |
BOSCH MEVD17.2.3 |
ECU pastabos
MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
