English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

AUDI S5 (8T/B8) 3.0L V6 24V TFSI 245kW/329HP SIMOS8.4

ECU CONTINENTAL-SIEMENS-VDO SIMOS 8.41 · 333 CV (245 kW) · 3000 cc · Benzina sovralimentato

ECU duomenų bazė › AUDI › AUDI S5 (8T/B8) 3.0L V6 24V TFSI 245kW/329HP SIMOS8.4

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 4 programinės įrangos versijos

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą

Esate servisas ar derintojas?

Transporto priemonės duomenys

MarkėAUDI
ModelisS5 (8T/B8)
Variklis3.0L V6 24V TFSI 245kW/329HP SIMOS8.4
Serijinė galia333 CV / 245 kW
Darbinis tūris3000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasCONTINENTAL-SIEMENS-VDO
ModelisSIMOS 8.41
Atmintis / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Boost pressure limiter
  • Desired engine load calculation
  • High pressure fuel pump setpoint
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Max torque profile
  • Optimal engine moment
  • Driver torque request

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
CAKA8K0907551C 1.33.0088K0907551C 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CAKA8K0907551C 1.33.0128K0907551C 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CAKA8K0907551 1.33.0238K0907551 0005 CONTINENTAL-SIEMENS-VDO SIMOS 8.41
CCBA8K0907551A 1.33.0128K0907551A 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.41

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

MICRO Infineon Tricore TC1796 PARTIAL FILE WARNING - New Genius with security Dongle: the certified file present in the setting is a partial file and it cannot be used with the FULL OBD2 mode of the serial protocol FLASH_0396. In order to use the FULL OBD2 mode of the serial protocol FLASH_0396 it is necessary first to read the FULL ecu file with New Trasdata (plugin 1091 SIMOS 8.3 / plugin 1087 SIMOS 8.4) and send the .DIM file to the Race technical support for the verification. Alternatively, you can perform the PATCH UNLOCK with New Trasdata plugin 512 and then proceed with the OBD2+UNLOCK mode of the serial protocol FLASH_0396. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the certified file present in the setting is a partial file and it cannot be used with the FULL OBD2 mode of the serial protocol FLASH_0396. In order to use the FULL OBD2 mode of the serial protocol FLASH_0396 it is necessary first to read the FULL ecu file with New Trasdata (plugin 1091 SIMOS 8.3 / plugin 1087 SIMOS 8.4) and send the .DIM file to the Race technical support for the verification. Alternatively, you can perform the PATCH UNLOCK with New Trasdata plugin 512 and then proceed with the OBD2+UNLOCK mode of the serial protocol FLASH_0396. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą Esate servisas ar derintojas?Siūlykite šias paslaugas patys: aktyvuokite savo TuningFile platformą

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Kiti AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ Visos ECU AUDI