AUDI A8 (D3/4E) 4.2L V8 32V TDI 257KW/350HP EDC16+

ECU BOSCH EDC16U31/U34/CP34 · 349 CV (257 kW) · 4200 cc · Diesel sovralimentato

ECU duomenų bazėAUDI › AUDI A8 (D3/4E) 4.2L V8 32V TDI 257KW/350HP EDC16+

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 7 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA8 (D3/4E)
Variklis4.2L V8 32V TDI 257KW/350HP EDC16+
Serijinė galia349 CV / 257 kW
Darbinis tūris4200 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisEDC16U31/U34/CP34
Atmintis / EPROMAm29BDD160G PQFP80 - Flash 3_V 512 x 32

Galimos derinimo operacijos / parinktys:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Load / throttle position reference
  • EGR valve control
  • Exhaust gas temperature
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection period 2
  • Injection period - correction
  • Injection opening time related to inj. pressure
  • J
  • Injection 2
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature limit - heater control
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature limit - heater control
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Protection for fuel overheating
  • Protection for oil overheating
  • Specific injection pressure limiter
  • Specific injection pressure
  • Specific injection pressure 3
  • Q
  • Driver torque request
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

Programinės įrangos identifikatoriai (7)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1037389870 1.00.0264E1910409D 0010 BOSCH EDC16U31/U34/CP34
1037392925 1.00.0184E1910409A 0080 BOSCH EDC16U31/U34/CP34
1037381447 1.67.0204E1910409A 0060 BOSCH EDC16U31/U34/CP34
1037377564 1.67.0254E1910409A 0030 BOSCH EDC16U31/U34/CP34
1037378480 1.67.0194E1910409A 0070 BOSCH EDC16U31/U34/CP34
1037378480 1.67.0184E1910409A 0040 BOSCH EDC16U31/U34/CP34
1037383056 1.00.0384E1910409A 0070 BOSCH EDC16U31/U34/CP34

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

Original EPROM Am29BDD160G PQFP 80 Pin - Microprocessor Motorola MPC56x. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata