AUDI A7 (4G8) 3.0L V6 24V TFSI 220kW/295HP SIMOS8.5

ECU CONTINENTAL-SIEMENS-VDO SIMOS 8.5 · 299 CV (22 kW) · 3000 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI A7 (4G8) 3.0L V6 24V TFSI 220kW/295HP SIMOS8.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 8 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA7 (4G8)
Variklis3.0L V6 24V TFSI 220kW/295HP SIMOS8.5
Serijinė galia299 CV / 22 kW
Darbinis tūris3000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasCONTINENTAL-SIEMENS-VDO
ModelisSIMOS 8.5
Atmintis / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Lambda/AFR full load/WOT
  • Boost pressure limiter
  • Desired engine load calculation
  • Maximum torque limitation at clutch
  • High pressure fuel pump setpoint
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • Lambda reference
  • Lambda driver wish
  • Knock detection factor
  • Max torque profile
  • Optimal engine moment
  • Driver torque request

Programinės įrangos identifikatoriai (8)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
4G0907551 1.33.0154G0907551 0007 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4H0907551 1.33.0034G0907551 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
8K0907551C 1.33.0194G0907551F 0002 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551F 1.33.0034G0907551F 0004 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551A 1.33.0054G0907551A 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551F 1.33.0054G0907551F 0003 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551 1.33.0044G0907551 0008 CONTINENTAL-SIEMENS-VDO SIMOS 8.5
4G0907551F 1.33.0134G0907551F 0006 CONTINENTAL-SIEMENS-VDO SIMOS 8.5

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop