AUDI A4 (B8/8K) 2.0L 16V TFSI 132kW/178HP MED17.1

ECU BOSCH MED17.1 · 180 CV (132 kW) · 2000 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI A4 (B8/8K) 2.0L 16V TFSI 132kW/178HP MED17.1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 10 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA4 (B8/8K)
Variklis2.0L 16V TFSI 132kW/178HP MED17.1
Serijinė galia180 CV / 132 kW
Darbinis tūris2000 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.1
Atmintis / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Galimos derinimo operacijos / parinktys:

  • Advance at idle speed
  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Speed limiter
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Air mass flow
  • S

Programinės įrangos identifikatoriai (10)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.94.0198K2907115Q 0005 BOSCH MED17.1
1.94.0148K2907115AK 0001 BOSCH MED17.1
1.94.0358K5907115 0005 BOSCH MED17.1
1.94.0328K2907115AH 0002 BOSCH MED17.1
1.94.0208K2907115Q 0007 BOSCH MED17.1
1.94.0068K5907115A 0005 BOSCH MED17.1
1.94.0278K2907115AH 0001 BOSCH MED17.1
1.94.0158K2907115R 0005 BOSCH MED17.1
1.94.0208K2907115R 0004 BOSCH MED17.1
1.94.0148K2907115AF 0001 BOSCH MED17.1

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU pastabos

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop