AUDI A3 (8L) 1.8L 20V TURBO 110KW/148HP Motronic

ECU BOSCH MOTRONIC M3.82 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU duomenų bazėAUDI › AUDI A3 (8L) 1.8L 20V TURBO 110KW/148HP Motronic

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėAUDI
ModelisA3 (8L)
Variklis1.8L 20V TURBO 110KW/148HP Motronic
Serijinė galia150 CV / 11 kW
Darbinis tūris1800 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMOTRONIC M3.82
Atmintis / EPROM27C1024 DIL40/PLCC44 1Mbit - Eprom 64K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Boost pressure
  • Injection at part load
  • Speed / RPM limiter
  • Pressure control F (RPM)
  • Boost at full throttle
  • Air mass flow
  • Overboost timing

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612042541037357471 1.33.005 BOSCH MOTRONIC M3.82
02612042541037357459 1.33.016 BOSCH MOTRONIC M3.82
02612042541037358737 1.33.004 BOSCH MOTRONIC M3.82
02612048051037358123 1.33.019 BOSCH MOTRONIC M3.82

Techninės pastabos apie automobilį

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU pastabos

Original EPROM 28F210 or 27C1024 PLCC 44 pins In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21.
Original EPROM 28F210 or 27C1024 PLCC 44 pins To read this EPROM with the EMP20/EMP21 programmer you need the PD44 adapters for PLCC 44 pins.
Eprom PLCC 27C1024 to read with PD44 adaptor.