ECU 数据库 ›
SEAT › SEAT LEON (KL) 2.0L 16V TDI 85kW/114HP MD1CS004
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
✓ 附加模块可用 3 固件版本
车辆数据
| 品牌 | SEAT |
| 型号 | LEON (KL) |
| 发动机 | 2.0L 16V TDI 85kW/114HP MD1CS004 |
| 原厂功率 | 116 CV / 85 kW |
| 排量 | 2000 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Auto |
ECU
| 制造商 | BOSCH |
| 型号 | MD1CS004 |
| 存储 / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
可用的调校选项:
- Boost pressure limiter
- Boost limiter correction for APS/BPS sensor
- Maximum torque limitation at clutch
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period limit
- Injection opening time related to inj. pressure
- Injection 2
- Injection 3
- Injection 4
- Torque limiter 2
- Torque limiter 3
- Torque limiter 4
- Torque limiter
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 3
- Lambda value of the smoke limitation 4
- Speed limiter
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 4
- Specific air mass charge
- Specific air mass charge 2
- Q
- Specific air mass charge 4
- Driver torque request
- Driver torque request 2
- Setpoint maximum turbocharger speed
- Overboost timing
- Turbocharger volumetric efficiency
固件标识 (3)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|
| — | — |
1.67.013 | 05L906022DC 1644 |
BOSCH MD1CS004 |
| — | — |
1.67.014 | 05L906022CF 0611 |
BOSCH MD1CS004 |
| — | — |
1.67.016 | 05L906022CF 1659 |
BOSCH MD1CS004 |
车辆技术说明
ECU located in the engine bay behind/close to the battery. Difficulty: easy
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU 说明
Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
