PORSCHE BOXSTER (987) 2.9L DFI 188kW/252HP ME7.8.2

ECU BOSCH ME7.8.2 min · 255 CV (188 kW) · 2900 cc · Benzina aspirato

ECU 数据库PORSCHE › PORSCHE BOXSTER (987) 2.9L DFI 188kW/252HP ME7.8.2

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 12 固件版本

车辆数据

品牌PORSCHE
型号BOXSTER (987)
发动机2.9L DFI 188kW/252HP ME7.8.2
原厂功率255 CV / 188 kW
排量2900 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.8.2 min
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Minimum advance allowed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • HFM/HLM air flow high limit
  • HFM/HLM air flow low limit
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Lambda efficiency
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Knock detection factor
  • MAF sensor calibration
  • Maximum ignition delay allowed for knock limiter intervention
  • Throttle air mass flow calculation
  • Minimum engine air charge value
  • Number of injections considered for knock limitation
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Driver wish
  • Driver torque request
  • Maximum threshold for detecting engine knock - bank 1
  • Maximum threshold for detecting engine knock - bank 2
  • Throttle angle management
  • Variable intake pulsation correction

固件标识 (12)

硬件号软件号 (chip)版本升级软件ECU
026120134900419100C463 1.87.00400419100C463FM92 BOSCH ME7.8.2 min
026120134900419100C463 1.87.00700419100C463EM5C BOSCH ME7.8.2 min
026120134900419100C440 1.87.00400419100C440FD74 BOSCH ME7.8.2 min
026120134900419100C440 1.87.00400419100C440UM71 BOSCH ME7.8.2 min
026120134900419100C463 1.87.00500419100C463FD92 BOSCH ME7.8.2 min
026120134900419100C500 1.87.00400419100C500VD5C BOSCH ME7.8.2 min
026120134900419100C463 1.87.00600419100C463FD93 BOSCH ME7.8.2 min
026120134900419100C500 1.87.00400419100C500UD5C BOSCH ME7.8.2 min
026120134900419100C463 1.87.00600419100C463FM93 BOSCH ME7.8.2 min
026120134900419100C463 1.87.01100419100C463ED5C BOSCH ME7.8.2 min
026120134900419100C500 1.87.00400419100C500VD92 BOSCH ME7.8.2 min
026120134900419100C463 1.87.00500419100C463EM94 BOSCH ME7.8.2 min

ECU 说明

Microprocessor ST10F275 Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Microprocessor ST10F275 Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop