English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

PORSCHE 997 3.8L CARRERA S 261kW/350HP ME7.8.1

ECU BOSCH ME7.8.1 · 355 CV (261 kW) · 3800 cc · Benzina aspirato

ECU 数据库 › PORSCHE › PORSCHE 997 3.8L CARRERA S 261kW/350HP ME7.8.1

查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 54 固件版本

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件

您是修理厂或调校师吗？

车辆数据

品牌PORSCHE
型号997
发动机3.8L CARRERA S 261kW/350HP ME7.8.1
原厂功率355 CV / 261 kW
排量3800 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME7.8.1
存储 / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

可用的调校选项:

  • Base timing
  • Minimum advance allowed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • HFM/HLM air flow high limit
  • HFM/HLM air flow low limit
  • Lambda enrichment for components protection
  • Torque limiter at high EGT
  • Lambda efficiency
  • RPM Limiter
  • RPM limiter in Park position
  • Lambda driver wish
  • Knock detection factor
  • MAF sensor calibration
  • Maximum indicated torque
  • Maximum ignition delay allowed for knock limiter intervention
  • Maximum possible engine charge
  • Throttle air mass flow calculation
  • Minimum engine air charge value
  • Number of injections considered for knock limitation
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode 2
  • Driver wish
  • Driver torque request
  • Driver torque request for reverse gear
  • Driver torque request Sport mode
  • Maximum threshold for detecting engine knock - bank 1
  • Maximum threshold for detecting engine knock - bank 2
  • Throttle angle management
  • Variable intake pulsation correction

固件标识 (54)

硬件号软件号 (chip)版本升级软件ECU
02612079871037369642 1.27.0080041900007333A19 BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007333A22 BOSCH ME7.8.1
02612079871037379149 1.27.0160041900007413A08 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A01 BOSCH ME7.8.1
02612079871037379149 1.27.0040041900007413A12 BOSCH ME7.8.1
02612079871037369642 1.27.0140041900007113A14 BOSCH ME7.8.1
02612079871037379149 1.27.0060041900007413A0D BOSCH ME7.8.1
02612079871037369642 1.27.0130041900007333A18 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007333A11 BOSCH ME7.8.1
02612079871037369642 1.27.0160041900007333A29 BOSCH ME7.8.1
02612079871037369642 1.27.0030041900007103A0E BOSCH ME7.8.1
02612079871037379149 1.27.0050041900007413A02 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A02 BOSCH ME7.8.1
02612079871037369642 1.27.0460041900007113A03 BOSCH ME7.8.1
02612079871037379149 1.27.0040041900007413A01 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007337A07 BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007333A01 BOSCH ME7.8.1
02612079871037369642 1.27.009004190000710390D BOSCH ME7.8.1
02612079871037369642 1.27.0210041900007103A08 BOSCH ME7.8.1
02612079871037379149 1.27.0240041900007411037 BOSCH ME7.8.1
02612079871037379149 1.27.0080041900007417A17 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A0K BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007337A2J BOSCH ME7.8.1
02612079871037369642 1.27.0050041900007103901 BOSCH ME7.8.1
02612079871037369642 1.27.0030041900007113A04 BOSCH ME7.8.1
02612079871037369642 1.27.005004190000710390E BOSCH ME7.8.1
02612079871037379149 1.27.0070041900007413939 BOSCH ME7.8.1
02612079871037369642 1.27.0060041900007103A19 BOSCH ME7.8.1
02612079871037369642 1.27.0030041900007337A16 BOSCH ME7.8.1
02612079871037379149 1.27.0050041900007413A0K BOSCH ME7.8.1
02612079871037379149 1.27.0080041900007413A18 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007337A17 BOSCH ME7.8.1
02612079871037369642 1.27.0080041900007333A03 BOSCH ME7.8.1
02612079871037379149 1.27.0070041900007413A09 BOSCH ME7.8.1
02612079871037369642 1.27.0090041900007333A09 BOSCH ME7.8.1
02612079871037379149 1.27.0130041900007413A19 BOSCH ME7.8.1
02612079871037369642 1.27.0110041900007333A08 BOSCH ME7.8.1
02612079871037369642 1.27.0070041900007103A0L BOSCH ME7.8.1
02612079871037369642 1.27.0150041900007103A09 BOSCH ME7.8.1
02612083001037369620 1.27.00800419100A8223A34 BOSCH ME7.8.1
02612083001037369620 1.27.00500419100A8223A13 BOSCH ME7.8.1
02612083001037369620 1.27.00700419100A8227A09 BOSCH ME7.8.1
02612083001037369620 1.27.00500419100A8223A03 BOSCH ME7.8.1
02612083001037379150 1.27.00400419100A8423A14 BOSCH ME7.8.1
02612083001037379150 1.27.00500419100A8423A13 BOSCH ME7.8.1
02612083001037379150 1.27.00300419100A8423A04 BOSCH ME7.8.1
02612083001037379150 1.27.00700419100A8423A23 BOSCH ME7.8.1
02612083001037369620 1.27.01200419100A8223A33 BOSCH ME7.8.1
02612083001037379150 1.27.00600419100A8423A24 BOSCH ME7.8.1
02612083001037379150 1.27.00300419100A8423924 BOSCH ME7.8.1
02612083001037369620 1.27.00800419100A8227A29 BOSCH ME7.8.1
02612083001037369620 1.27.01200419100A8223A23 BOSCH ME7.8.1
02612083001037379150 1.27.01500419100A8423A03 BOSCH ME7.8.1
02612083001037369620 1.27.00500419100A8223A24 BOSCH ME7.8.1

ECU 说明

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

获取该车辆的文件

购买文件（原始或改写）在 mastertuningfile.com 注册并订购文件 您是修理厂或调校师吗？自己提供这些服务：激活您的 TuningFile 平台

读写此 ECU 的工具

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 购买 The Genius The Genius OBD + Bench € 2.500 购买

其他 PORSCHE

911
3.2L CARRERA 170kW/228HP Motronic 924
2.5L 16V S 110kW/148HP 944
3.0L S2 155kW/208HP Motronic 944
2.5L Turbo 162kW/217HP Motronic 993
3.6L CARRERA 200kW/268HP M2.7 968
3.0L 177kW/237HP M2.7 928
5.0L S4 235kW/315HP 996
3.4L CARRERA 221kW/296HP M5.2.2 996
3.4L CARRERA 221kW/296HP ME7.2 964
3.6L TURBO S 280kW/376HP M2.7

→ 所有 ECU PORSCHE