PORSCHE 991.1 3.8L GT3 349kW/469HP MED17.1.11

ECU BOSCH MED17.1.11 · 475 CV (349 kW) · 3800 cc · Benzina aspirato

ECU 数据库PORSCHE › PORSCHE 991.1 3.8L GT3 349kW/469HP MED17.1.11

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 14 固件版本

车辆数据

品牌PORSCHE
型号991.1
发动机3.8L GT3 349kW/469HP MED17.1.11
原厂功率475 CV / 349 kW
排量3800 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号MED17.1.11
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Driver torque request 2
  • Torque limiter for selected gear
  • Throttle angle management

固件标识 (14)

硬件号软件号 (chip)版本升级软件ECU
1.94.00599161865911 3273 BOSCH MED17.1.11
1.94.00799161865611 3270 BOSCH MED17.1.11
1.94.00499161865905 2461 BOSCH MED17.1.11
1.00.00799161865710 3033 BOSCH MED17.1.11
1.00.00599161865711 3271 BOSCH MED17.1.11
1.94.00999161865811 3272 BOSCH MED17.1.11
1.00.02599161865708 2659 BOSCH MED17.1.11
1.00.01099161865609 2707 BOSCH MED17.1.11
1.94.01099161865808 2660 BOSCH MED17.1.11
1.94.01099161865610 2842 BOSCH MED17.1.11
1.94.00799161865810 3034 BOSCH MED17.1.11
1.94.00899161865910 3035 BOSCH MED17.1.11
1.00.00699161865608 2658 BOSCH MED17.1.11
1.00.01299161865709 2698 BOSCH MED17.1.11

ECU 说明

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop