MERCEDES E CLASS W212/S212 E500 5.5L V8 285kW/382HP ME9.7

ECU BOSCH ME9.7 · 387 CV (285 kW) · 5500 cc · Benzina aspirato

ECU 数据库MERCEDES › MERCEDES E CLASS W212/S212 E500 5.5L V8 285kW/382HP ME9.7

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 3 固件版本

车辆数据

品牌MERCEDES
型号E CLASS W212/S212
发动机E500 5.5L V8 285kW/382HP ME9.7
原厂功率387 CV / 285 kW
排量5500 cc
燃料Benzina aspirato
车辆类型Auto

ECU

制造商BOSCH
型号ME9.7
存储 / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

可用的调校选项:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • HFM/HLM threshold for diagnosis
  • Torque limiter for diagnostic
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • Torque limiter at high EGT
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum indicated torque
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Throttle angle management
  • Variable intake pulsation correction

固件标识 (3)

硬件号软件号 (chip)版本升级软件ECU
00344669400094489340 1.79.0110064477440 BOSCH ME9.7
00344670402739020000 1.79.0142739030100 BOSCH ME9.7
00344670402739020000 1.79.0060000BF01E5 BOSCH ME9.7

ECU 说明

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop