FUART M12 3.9L 130kW/174HP EDC7UC31
ECU BOSCH EDC7UC31 · 177 CV (13 kW) · 3900 cc · Diesel sovralimentato
查找固件标识（硬件、软件和升级编号）、可用的调校选项，以及如何获取原始或改写文件。
✓ 通过文件调校 (flash)
1 固件版本
车辆数据
| 品牌 | FUART |
| 型号 | M12 |
| 发动机 | 3.9L 130kW/174HP EDC7UC31 |
| 原厂功率 | 177 CV / 13 kW |
| 排量 | 3900 cc |
| 燃料 | Diesel sovralimentato |
| 车辆类型 | Tir |
ECU
| 制造商 | BOSCH |
| 型号 | EDC7UC31 |
| 存储 / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
可用的调校选项:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit 2
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Turbocharger volumetric efficiency
固件标识 (1)
| 硬件号 | 软件号 (chip) | 版本 | 升级软件 | ECU |
|---|---|---|---|---|
| — | — | 1.00.014 | P340VA04 fbymbz00.vi5 | BOSCH EDC7UC31 |
ECU 说明
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
