FORD TOURNEO CUSTOM 2.2L TDCi 92kW/123HP SID208

ECU CONTINENTAL-SIEMENS-VDO SID208 · 125 CV (92 kW) · 2200 cc · Diesel sovralimentato

ECU 数据库FORD › FORD TOURNEO CUSTOM 2.2L TDCi 92kW/123HP SID208

查找固件标识(硬件、软件和升级编号)、可用的调校选项,以及如何获取原始或改写文件。

✓ 通过文件调校 (flash) ✓ 附加模块可用 17 固件版本

车辆数据

品牌FORD
型号TOURNEO CUSTOM
发动机2.2L TDCi 92kW/123HP SID208
原厂功率125 CV / 92 kW
排量2200 cc
燃料Diesel sovralimentato
车辆类型Auto

ECU

制造商CONTINENTAL-SIEMENS-VDO
型号SID208
存储 / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

可用的调校选项:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure limit control
  • Boost pressure precontrol value
  • Boost pressure
  • Boost pressure 2
  • Protection for cylinder head overheating
  • Correction for boost pressure
  • Exhaust gas temperature
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Gearbox maximum torque allowed
  • Injection opening time related to inj. pressure
  • Inverse first duration injection map for monitoring
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Torque limiter for smoke limitation
  • Smoke limiter
  • RPM Limiter
  • RPM limiter - Low gears
  • Speed limiter
  • Maximum indicated torque
  • Torque/load reduction for overheating protection
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow
  • Driver torque request - low range
  • Requested crankshaft/transmission torque
  • Requested cranckshaft torque - low range
  • Driver torque request
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Max torque limitation in Neutral (N)
  • Torque limiter for for reverse gear
  • Start of injection
  • Start of injection 2
  • Torque limiter for the APS/BPS
  • Torque limiter for EFT sensor
  • Torque limit table for EOT sensor
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 2
  • Torque limitation - turbocharger protection
  • Torque limitation - turbocharger protection 2
  • Torque model - fuel quantity to torque conversion
  • Torque model - torque to fuel quantity conversion
  • Torque model - torque to fuel quantity conversion 2
  • Turbocharger volumetric efficiency

固件标识 (17)

硬件号软件号 (chip)版本升级软件ECU
BK2A-12B684-ABBK21-12A650-AB 1.37.009BK21-14C204-CBC CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.47.007BK2A-12C204-BEY CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.47.010BK21-14C204-BEZ CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.47.012BK21-14C204-BEV CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.47.008BK21-14C204-BEX CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.37.006BK21-14C204-BGY CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.37.011BK21-14C204-BBV CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.47.006BK21-14C204-BBU CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.47.016BK21-14C204-BER CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BBBK21-12A650-BB 1.37.009BK21-14C204-BBZ CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BCBK21-12A650-AC 1.47.024BK21-14C204-BTH CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BCBK21-12A650-AC 1.47.008BK21-14C204-BMH CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BCBK21-12A650-AC 1.47.013BK21-14C204-BTK CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BCBK21-12A650-AC 1.47.005BK21-14C204-BPJ CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BCBK21-12A650-AC 1.47.010BK21-14C204-BTL CONTINENTAL-SIEMENS-VDO SID208
BK2A-12B684-BCBK21-12A650-AC 1.47.017BK21-14C204-BCN CONTINENTAL-SIEMENS-VDO SID208
BU7A-12B684-ABBU71-12A650-GB 1.37.015BK21-14C204-BVM CONTINENTAL-SIEMENS-VDO SID208

车辆技术说明

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU 说明

MICRO Infineon Tricore TC1797 This Setting File can be used for serial system NewGenius. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

可用附加模块

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop